Connecting Spoolmatic) 15A Or 30A Gun - Miller Millermatic 251 Owner's Manual

4-6. Connecting Spoolmatic) 15A Or 30A Gun

2
Tools Needed:
3/4, 5/8 in
OM-1326 Page 12
1
2
3
5
6
4
3
1 Gun Trigger Plug
Insert plug into receptacle, and
tighten threaded collar.
2 Weld Cable
3 Shielding Gas Hose
Route weld cable through opening
in front panel.
Route gas hose along side panel.
4 Positive Weld Output Terminal
Connect weld cable to weld output
terminal.
5 Regulator/Flowmeter
6 Y-Adapter Fitting
Route shielding gas hose up to
regulator/flowmeter . Connect gas
hose to Y-adapter fitting on regula-
tor/flowmeter.
.
Two welding guns may be
connected to the welding
power source at the same time,
but only one welding gun may
be in use at any one time. If the
triggers of both welding guns
are pulled at the same time, the
weld output and wirefeed motor
are disabled.
804 455-A