NordicTrack E 10.7 Elliptical Manual page 11

7. Apply some of the included grease to an Arm
Axle (93).
Insert the Arm Axle (93) into the Right Pedal Arm
(37), through an Arm Spacer (130), and into the
Right Roller Arm (39).
Then, tighten an M10 x 20mm Screw (107) with
an M10 Washer (111) into each end of the Arm
Axle (93) at the same time.
Repeat this step to attach the Left Pedal Arm
(38) to the Left Roller Arm (40).
8. Identify the Right Upper Body Arm (25) and ori-
ent it as shown. Do not insert the Right Upper
Body Arm into the Right Upper Body Leg (26)
yet.
Apply some of the included grease to the axle on
the right side of the Upright (4).
Slide the Right Upper Body Arm (25) onto the
right side of the Upright (4). Attach the Right
Upper Body Arm with an M8 x 18mm Screw
(109) and an M8 Washer (103).
Repeat this step to attach the Left Upper
Body Arm (27) to the Upright (4).
7
38
107
111
40
8
27
11
39
130
93
37
Grease
111
4
Grease
25
103
26
107
109