GE EPM 7300 Installation Manual page 77

Normal Scroll, Wye
Current, RMS Phase A
Current, RMS Phase B
Current, RMS Phase C
Current, RMS Neutral
Voltage, RMS Phase A–N
Voltage, RMS Phase B–N
Voltage, RMS Phase C–N
Voltage, RMS Phase A–B
Voltage, RMS Phase B–C
Voltage, RMS Phase C–A
Watts, Phase A
Watts, Phase B
Watts, Phase C
Watts, Total
Watts, Demand
Watts, Peak Demand
Vars, Phase A
Vars, Phase B
Vars, Phase C
Vars, Total
Volt-amperes, Phase A
Volt-amperes, Phase B
Volt-amperes, Phase C
Volt-amperes, Total
Power Factor, Total
Watthours, Total
Varhours, Total Lag (+)
Varhours, Total Lead (–)
Volt-ampere-hours, Total
Frequency, in hertz
69
differ depending on whether the EPM is configured as Wye or Delta. Please note that
the Normal Scroll Delta and Alternate Scroll Delta lists contain several parameters
marked with an asterisk; these parameters were included in the wizard for
programming reasons, but are not valid for Delta configurations and should not be
used.
Normal Scroll, Delta
Current, Phase A
Current, Phase B
Current, Phase C
Current, RMS Neutral *
Voltage, RMS Phase A–N *
Voltage, RMS Phase B–N *
Voltage, RMS Phase C–N *
Voltage, RMS Phase A–B
Voltage, RMS Phase B–C
Voltage, RMS Phase C–A
Watts, Phase A–B
Watts, Phase B–C
Watts, Total
Watts, Demand
Watts, Peak Demand
Vars, Phase A–B
Vars, Phase B–C
Vars, Total
Volt-amperes, Phase A–B
Volt-amperes, Phase B–C
Volt-amperes, Total
Power Factor, Total
Watthours, Total
Varhours, Total Lag (+)
Varhours, Total Lead (–)
Volt-ampere-hours, Total
Frequency, in hertz