Kenwood KDC-X597 Instruction Manual page 9

If a locked channel or a mature channel ([MATURE CH] is set to [ON]) is selected, a
pass code input screen appears. Enter the pass code to receive the channel.
• To store a channel of the current band:
Press and hold one of the number
buttons (1 to 6).
• To select a stored channel of the current band:
Press one of the number
buttons (1 to 6)
1
Press
DIRECT
to enter Direct Access Tuning.
2 Press the number buttons to enter a channel number, then press
~I~(+)
to start searching.
• To cancel,
press~
or DIRECT.
Press~ (or~
on RC-406).
Replay starts from the live position (and
"~(!)"
lights up for
13•III!Jetr4).
During Replay ...
• To pause or resume playback, press 6
~II
(or
ENT ~II
on RC-406).
• To skip the current song backward/forward,
press~ I~ (or~ I~(+)
on RC-406).
• To rewind/fast-forward, press and
hold~ I~ (or~ I~(+)
on RC-406).
• To exit from Replay and go to live,
press~ (or~
on RC-406).
1
Press the volume knob to enter [FUNGION].
2 Turn the volume knob to select [SETTINGS], then press the knob.
3 Turn the volume knob to make a selection (see the following table), then press
the knob.
4
Press and hold
~
to exit.
SEEK MODE
Default XX
Selects the tuning method for
the~ I~
buttons.
CHANNEL: Manually search for a channel.; PRESET: Search for a preset channel of
the selected band.
CODE SET
CHANNEL EDIT/
CH EDIT*
OJ
Turn the volume knob to select a number.
[I] Press
~ I~
to move to the entry position.
W
Repeat steps
OJ
and
W
to enter a new 4-digit pass code.
[!] Press the volume knob to confirm.
[[] Repeat steps
OJ
to[!] to reconfirm the pass code .
SiriusXM™
Default XX
• Make a note of the new pass code to enter channel lock settings from next
time.
OJ
Turn the volume knob to select a category, then press the knob.
[I]
Turn the volume knob to select a channel you want to lock, then press the·
knob. "L" appears in front of the channel number.
W
Press
~
to exit.
CHANNEL CLEAR/ YES: Clears all the locked channels. ; NO: Cancels.
CH CLEAR*
MATURECH ON: Turns on the Sirius XM-defined lock setting (mature channel).;
OFF: Turns off.
• If [ON] is selected, your setting (CHANNEL EDIT/ CH EDIT) is temporary
ignored.
SIGNAL LEVEL/ NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the strength of the current received
SIGNAL LVL signal.
------------------------------------------------------------------------------------------------------
BUFFER USAGE/ 0%-100%
(~):Shows
the memory usage for Replay buffer.
BUF USAGE
* Displayed only when [MATURE CH] is set to [Off].
ENGLISH
I
9