Related Manuals for Pyle PL5CSUB
Summary of Contents for Pyle PL5CSUB
- Page 1 USB CASSETTE PLAYER PL5CSUB Pyle Audio www.PyleAudio.com READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE...
-
Page 2: First Step
PLAY A TAPE: (THREE STEPS) FIRST STEP: (1) Plug the power cable to the AC power supply. (2) Insert a selected cassette tape into the device with the exposed side against the control button. SECOND STEP: To fast-forward, lightly press the control button as seen in figure ④. THIRD STEP: To stop the playing and eject the tape, fully press down the control button;... - Page 3 CONNECT THE DEVICE TO SPEAKERS Use the set of stereo RCA jacks on the top of the device to connect your cassette player to an amplifier or receiver. RECORD THE MUSIC: 1. Connect the USB cable to the device and computer. No extra drivers are required. 2.
- Page 4 4. Select the “Edit” menu and then “Preference” select the USB PnP Audio Device under the “Recording” selection, Channels: 2(stereo). Also select Software Playthrough to hear the audio while recording. Note: the USB cassette recorder may show up with a different name. This may depend on your computer model and operating system.
- Page 5 6. Select the PAUSE button to pause the recording. 7. Select the STOP button to stop the recording. 8. Select the to skip to start. 9. Select the button to go to end.
- Page 6 10. You can see the recorded file on your computer and convert the recorded file to other formats including .WAV/ MP3/Ogg Vorbis. 11. Play the saved file. Open the saved file in the Audacity program and press the PLAY button to play the file.