System Connections; System Connection Via A Lan And A Sip - Sony Ipela PCS-XG55 Integration Manual

1-2. System Connections

This section describes the typical system connections.
m
. Be sure to turn off all the equipments before making any connections.
. Do not connect/disconnect the camera cable, interface cable, or pen tablet with the power on. Doing so
may damage the Camera Unit, main unit or ISDN Unit.
. For safety, do not connect the 100BASE-TX/10BASE-T connector to a network that applies excess
voltage via the 100BASE-TX/10BASE-T connector.
. When the main unit is being used with a Camera Unit or ISDN Unit for the fi rst time, the main unit may
begin to automatically upgrade the software of the Camera or the ISDN Unit.
While the upgrading message is displayed on the monitor screen, or the LED on the front of the main
unit is turned on, do not turn off the main unit or unplug the connecting cable. Otherwise, the system
may malfunction.

1-2-1. System Connection via a LAN and a SIP

PCSA-CXG80 HD
Camera Unit
VISCA OUT
Camera cable (supplied
with the Camera Unit)
to CAMERA
CAMERA S VIDEO IN
EC-MIC(A7) MIC(A1/A3)
1(R) 2(L)
1 2
AUDIO 1 IN
(PLUG IN POWER)
PCS-XG Series
*1
main unit
*1 The S VIDEO IN, EC-MIC (A7) 1/2,
AUDIO 1 IN, EXT 1/2, and
connectors are not available on the
PCS-XG55 main unit.
*2 The
1 connector on the PCS-
XG80 main unit corresponds to the
connector on the PCS-XG55
main unit.
1-26
TERMINAL
to TERMINAL
to MIC (A1/A3)
RGB IN RGB OUT HDMI OUT ISDN UNIT AUX CONTROL
R L R L R L DC 19.5V
AUDIO OUT REC OUT 1-EXT-2 1 2
*2
to 1 , or
to
SIP: to
HDMI OUT
HDMI cable
(supplied)
UTP cable (category 5, straight)
(not supplied)
to
HDMI IN
2
PCS-A1 microphone
VGP-AC19V15
AC adaptor
(supplied)
to LAN
connector
2
*2
1
to DC 19.5V
TV monitor
(not supplied)
to a wall outlet
Power cord (supplied)
to a wall outlet
SIP server
to LAN
connector
to LAN
IP
connector
telephone,
etc.
SIP case
PCS-XG80