Honda Goldwing F6B Owner's Manual page 168

12/12/06 16:29:52 32MJG600_168
MAINTENANCE
Failure to provide adequate disc to caliper holder clearance may damage the
brake discs and impair braking efficiency.
4. After installing the front wheel, apply the brake lever AND brake pedal
several times, then recheck both discs for caliper holder to disc clearance.
Do not operate the motorcycle without adequate clearance.
Check for free wheel rotation after the brake lever and brake pedal are
released. Recheck the wheel if the brake drags or if the wheel does not
rotate freely.
After installing the wheel, operate the brake lever AND brake pedal
several times until you feel pressure. You must restore pressure from
BOTH the lever AND the pedal because this motorcycle is equipped with
a Dual Combined Brake System.
Verify proper brake operation before riding.
5. Remove the protective tapes from the front wheel.
If a torque wrench is not used for installation, see your dealer as soon as
possible to verify proper assembly. Improper assembly may lead to loss of
braking capacity.
158
Feeler gauge