Table of Contents
Advertisement
Page 24
STORAGE
If the contactor is to be stored for any length of
time
prior
to
installation,
precautions should be taken.
1. The original packing should be restored, if
possible.
2. Do not subject the equipment to moisture or
sunrays.
Store in cool, clean, and dry
location.
3. Place a dust cover over the contactor
packaging to protect against dirt and
moisture.
4. Store in an upright position.
INSPECTION DURING STORAGE
Routine scheduled inspection is necessary if
storage is for an extended period. The unit
should be checked for condensation, moisture,
corrosion, and vermin.
Prior to installation, the contactor should be
carefully examined for evidence of physical
damage, corrosion, or other deterioration. Refer
to the PRE-ENERGIZATION Section of this
manual.
The MAINTENANCE section of this manual
describes
various
recommended for this contactor during the
operation period.
DISPOSAL
Contact your state environmental agency for
details on disposal of electrical components and
packaging in your particular area.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net
the
following
types
of
inspections
DISPOSAL AND STORAGE
Advertisement
Table of Contents
