Cleaning The Lint Filter; Cleaning The Water Inlet Filter; Cleaning The Drain Filter - Daewoo DWF-800MP Instruction Manual

DWF-800MP(¿ ) 01.3.26 9:58 PM ˘ ` 15

Cleaning the Lint Filter

1 Pull the Filter frame up
ward.

Cleaning the water inlet filter

• Clean the filter when water leaks form, the water inlet.
1 Pull the power plug
out before cleaning
it.

Cleaning the drain filter

• In case "U" shape drain hose, this filter's equipped at the cack side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc...
• If the drain filter is not cleaned at proper time(every 10 times of use), Drain problem could
be caused, see page
1 Put down the remained
water in the hose. And put a
container under the filter to
collect water.
CONTAINER
FILTER
4 Clean the drain filter
removing the foreign stuffs.
FILTER
CAP
2 Turn the lint filter inside out,
wash to the lint off with
water.
Lint Filter Filter Frame
2 Turn off the water 3 Pull the inlet filter
supply to the washer
and sperate the inlet
hose.
2 Turn the cap counter
clockwise.
CAP
5 Put in the filter along the
guiding prominence of the
case. Please note the left
position of the filter adjusting
the groove to the guide rib.
CASE
FILTER
GUIDE
RIB
CAP
SLIT
15
3 Return the filter as it was,
and insert the filter frame
into the slot
4 Remove the dirt
out. from the inlet filter
with a brush.
3 Pull out the filter assembly
off the case of the main
body.
FILTER
CAP
6 Turn the cap clockwise
tightly.
CAP
SLIT
CASE