GE Spacemaker JVM140J Use And Care Manual page 22

PROBLEM
OVEN WILL NOT
COME ON
CONTROL PANEL
LIGHTED, YET
OVEN WILL NOT
START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
ON DISPLAY
Steam or vapor escaping from
around the door.
Light reflection around door or
outer case.
If you need more help...call, toll free: GE Answer Center@/ 800.626.2000/ consumer information service
22
POSSIBLE CAUSE
A fuse in your home may be blown or the circuit breaker tripped. Replace fuse or
reset circuit breaker.
Unplug your microwave oven, then plug it back in.
Door not securely closed.
START pad must be touched after entering cooking selection.
Another selection entered already in oven and CLEAWOFF pad not touched to
cancel it.
Make sure you have entered cooking time after touching TIME COOK I & II pad.
START pad.
. Make sure you have entered a temperature tier touching TEMP COOK & HOLD pad.
Cooking times may vary because of starting food temperature, food density or
amount of foods in oven. Touch TIME COOK I & II pad and additional cooking time
for completion.
Incorrect power level entered, Check cookbook for recommended power level.
Dish was not rotated, turned or stirred. Some dishes require specific instructions.
Check cookbook or recipe for instructions.
Too many dishes in oven at same time. Cooking time must be increased when
cooking more than one food item. Check cookbook time recommendations.
Probe not inserted properly into meat or dish when using Temp Coo~old or Auto
Roast function. Check cookbook for specific instructions.
Probe has been forgotten or not seated properly in oven wall when using Temp
Cook & Hold or Auto Roast function.
All these things are normal with your microwave oven:
Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
is operating.
Some TV-Radio interference
might be noticed while using your
microwave oven. It's similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.