Replacing The Cover Presence Switch (Also Called Intrusion Switch) - Lenovo ThinkCentre M93z Hardware Maintenance Manual

Figure 31. Removing the thermal sensor
9. Connect the thermal sensor cable to the system board. See "Locating parts on the system board"
on page 74.
10. Align the screw holes in the VESA mount bracket with those in the chassis, and then install the screws
to secure the VESA mount bracket to the chassis.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 127.

Replacing the cover presence switch (also called intrusion switch)

Attention:
Do not open your computer or attempt any repair before reading and understanding "Important Safety Information"
on page 1.
This section provides instructions on how to replace the cover presence switch.
To replace the cover presence switch, do the following:
100
ThinkCentre M93z Hardware Maintenance Manual