Table of Contents
Advertisement
Note
Clean the print
nozzles when:
•
Characters are not printing
completely.
•
Characters print with white
lines.
•
White dashes appear in
graphics.
•
Print is smudged or too
dark.
Quick Fix
Poor print quality
Make sure you have
installed your cartridges in
their appropriate positions.
The black cartridge goes in
the right carrier position and
the color cartridge goes in
the left.
36
The printer feeds a sheet of paper and prints a nozzle test pattern,
similar to the one shown:
3
Examine the test pattern.
4
Compare the diagonal lines above the printed bars to the diagonal lines
below the printed bars.
Look for breaks in the diagonal lines above the printed bars. Broken
lines indicate clogged nozzles.
•
If the bottom line still has breaks, run the test two more times. If
the print quality is satisfactory after running the test three times,
the print nozzles are clean. You do not need to complete the
remaining steps.
•
If the print quality of both lines is not satisfactory after running
the test three times, go to step 5.
5
Remove and reinstall the print cartridge.
6
Repeat the nozzle test.
7
If the lines are still broken, wipe the print cartridge nozzles. For help,
see "Wiping print nozzles and contacts" on page 37.
Chapter 4
Broken lines
indicate
clogged
nozzles.
Unbroken
lines indicate
clean nozzles.
Advertisement
Table of Contents
