Custom Settings - Kodak PIXPRO AZ521 User Manual

Custom Settings

The user can store the frequently used
shooting modes and parameters and switch
to this mode for quick adjustment.
Settings under
state after reset):
. Turn the mode dial to select the
mode, and enter the setup screen, as
shown in the figure below:
Select one capture mode to define CS .
Save
Exit
2. As shown in the above figure, press
the left / right arrow buttons to select a
scene, and press the
the shooting screen.
. As shown in the above figure, press the
button, and choose whether to
continue the
8 8
mode (unset state or
Landscape
button to enter
mode setting.
Go to setting CS mode
Rotating the mode dial to skip .
Settings under non-
. Select any mode or scene mode to be
stored.
2. Set your desired parameters in the
current mode.
. Press the button, press the up/down
arrow button to select
button to enter the menu.
4. Press up/down arrow button to select
, and press the
arrow button to enter the menu.
Yes
Or
mode:
, and press the
button or right