HP Cluster Platform Introduction v2010 Installation Manual page 22

6. The bottom section contains options to join a Domain or Workgroup. The Workgroup option
is currently selected. Select Domain and join the cluster to a domain.
NOTE:
and proceed to step 11. For instructions, see
7. Enter the domain name, a legal domain username, and password. The computer is now
allowed to join.
8. Select No when asked to reboot.
9. To enable log in from remote desktop, select the Remote Access tab. The Remote Desktop
should be enabled. If not, enable remote desktop. After enabling remote desktop, select
Select Users... and add the domain users to allow Remote Desktop Access. You might be
required to enter Domain Administrator credentials to complete this operation. Click OK
to close the System Properties window.
10. Select Yes when asked to reboot, and close the System Properties window to complete the
system reboot.
11. After the system has rebooted, log on as Domain Administrator.
IMPORTANT:
close all windows, log out, and retry as Domain Administrator.
12. Close the Initialize Server and Manage Server windows.
13. The Microsoft HPC Pack 2008 Installation Wizard window opens.
22 Installing HPCS on a Compute Cluster
If you do not have a domain to join, promote the head node to a domain controller
Log on as Domain Administrator. If you log on as Local Administrator,
Appendix A (page 67).