PERIODIC MAINTENANCE AND MINOR REPAIR
Front wheel
To remove the front wheel
WARNING
G
It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut.
6
1. Washer
2. Axle nut
2. Lift the front wheel off the ground
according to the procedure on
page 6-27.
3. Remove the axle nut and washer.
EAU24360
4. Pull the wheel axle out, and then
remove the wheel.
EAU41340
EWA10820
1. Wheel axle
To install the front wheel
1. Lift the wheel up between the fork
legs.
2. Insert the wheel axle from the right
side.
3. Lower the front wheel so that it is
on the ground.
4. Install the washer and axle nut,
and then tighten the axle nut to the
specified torque.
Tightening torque:
Axle nut:
70 Nm (7.0 m·kgf, 50 ft·lbf)
Rear wheel
To remove the rear wheel
1. Loosen the axle nut.
2. Lift the rear wheel off the ground
EAU41420
3. Loosen the locknut and drive chain
4. Remove the axle nut and washer.
6-28
WARNING
G
It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
according to the procedure on
page 6-27.
adjusting bolt on each side of the
swingarm.
EAU25080
EAU41311
EWA10820