HP Brocade BladeSystem 4/12 Release Note page 14

Table 6 Other countries' counters
Counter Name
CRC Errors
Signal Losses
Sync Losses
Link Failures
Sequence Errors
Invalid Transmissions
Rx Link Resets
Tx Link Resets
C3 Discard
Latency
Dropped Packets
Link Retransmits
Timeout Retransmits
Fast Retransmits
Duplicate Ack Received
Window Size RTT
TCP Out of Order Segments
SlowStart Status
CRC Errors
Installation on Network Mounted Drives is not supported.
Installation onto a windows network mounted drive is not supported but installation, if attempted,
is allowed and DB fails to start.
Client disconnects
Under heavy server load or degraded network links, there is a potential for the Network Advisor
client to disconnect from the server. The workaround is to restart the client.
SMI Agent
If SMI client queries CIMOM server for more than one fabric, and if each fabric has a large zone
database (~1MB), then Enumerate Instances operation on
Brocade_ZonemembershipsettingdataInZone fails. In this scenario, HP recommends that
you use the association traversal approach via Brocade_Fabric to retrieve the larger zone databases.
SMI alert indication BRCD60 is not sent out to SMI clients if Fabric OS switches are discovered
but SNMP trap registration has failed. Ensure that the Network Advisor server is successfully
registered for traps on all switches.
If DCB switches are running Fabric OS 6.3.x, VLAN/ACL deployment through SMI-A fails. You
must upgrade the DCB Fabric OS to 6.4.x/7.0.0a for VLAN/ACL deployment support through
the SMI Agent.
14
Type Protocol used
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FC SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
FCIP SNMP
EE Monitors HTTP
Source value
.1.3.6.1.3.94.4.5.1.40
.1.3.6.1.3.94.4.5.1.43
.1.3.6.1.3.94.4.5.1.44
.1.3.6.1.3.94.4.5.1.39
.1.3.6.1.3.94.4.5.1.42
.1.3.6.1.3.94.4.5.1.41
.1.3.6.1.3.94.4.5.1.33
.1.3.6.1.3.94.4.5.1.34
.1.3.6.1.3.94.4.5.1.28
.1.3.6.1.4.1.1588.4.1.1.5
.1.3.6.1.4.1.1588.4.1.1.3
.1.3.6.1.4.1.1588.4.1.1.2
.1.3.6.1.4.1.1588.4.1.1.9
.1.3.6.1.4.1.1588.4.1.1.10
.1.3.6.1.4.1.1588.4.1.1.1 1
.1.3.6.1.4.1.1588.4.1.1.12
.1.3.6.1.4.1.1588.4.1.1.13
.1.3.6.1.4.1.1588.4.1.1.14
PortCRC (variable from the return html
file)