Diagdisablepost - Brocade Communications Systems Brocade 8/12c Command Reference Manual

2

diagDisablePost

diagDisablePost
Disables the power-on self-test (POST).
Synopsis diagdisablepost
Description Use this command to disable POST. A reboot is not required for this command to take effect. Use
the diagPost command to display the current POST status, and use diagEnablePost to enable
POST.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands none
Examples To disable the POST:
See Also diagEnablePost, diagPost
204
switch:admin> diagdisablepost
Config update Succeeded
Diagnostic POST is now disabled.
Fabric OS Command Reference
53-1001764-01