What Is Collected - HP 9000 rp3410 Faq

What is collected ?

The /tmp/sysinfo.[shar|tgz|uu] file contains the following Files:
bdf_swapinfo.txt
bootconf.txt
ccerrlog
config
kernelconf.txt
config.lvm
crash.txt
crashinfo.crash.X.html
cstm.info
cprop.txt
diagdata.tar
diaginfo.txt
diskinfo.txt
dmesg.txt
event.log*
[fcd|fclp|
fcoc]diag_date.txt.gz
fcmsutil.out
fpl.log.??
getsysinfo.log
hpvmconsole.vmname.log
hpvmstatus.txt
icod.txt
icod.log
ioscan.txt
ioscan_fnk.txt
irdiag.out
lanconfig
lastlogs.raw
machinfo.txt
memlog.txt
mpt.out
nettl.txt
olar.txt
oselogs.tgz
partition.txt
ps_top.txt
rc.log
rc.log.old
Output of bdf and swapinfo -tam
lvlnboot -v, lifls of bootdisks, AUTO file(s), setboot, ll /stand/vmunix/*
GSP Chassis codes (from /var/stm/logs/os, binary file, only PA-Risc Servers)
general information (uname, model, etc.)
kernel configuration
LVM relevant info (lvmtab, fstab, vgdisplay & lvlnboot -v (not with -s))
information about crash config and /var/adm/crash directory
Wiith option -c, if /opt/sfm/tools/crashinfo* is present, and a dump is in /var/adm/crash, the dump is
analyzed with crashinfo -H -c
STM information logout from all devices.
output of System Management Homepage related information (cprop -details -a)
Information needed for diag software troubleshooting (only with -diag option)
Several diagnostic related information. ll -R /var/stm /var/psb /var/opt/sfm /var/opt/resmon.
output of diskinfo -v of all disks (only with -d)
Dmesg
/var/opt/resmon/log/event.log* files younger than 90 days
-san: Output of fclpdiag or fcddiag or fcocdiag if fibre channel cards exist for this driver
nice grep output from fcmsutil (Fibre Channel Infos)+ tdlist + fcdlist
Chassis Error Log Files on newer systems (from /var/stm/logs/os, younger than 90 days)
log of STDOUT and STDERR of the getsysinfo.sh run
Console log of virtual machines captured on the VSP – not if -s is set
information about HP virtual machines (and vpars >=6.0)
output of icod_stat, icod_stat -s (ver≥6) or icod_stat -u (<6)
ioscan -fn (-s: ioscan -fnk).
For HPUX 11.31:ioscan -fN and also ioscan -m dsf, ioscan -m lun , ioscan -m hwpath.
For Superdome 2: ioscan -m resourcepath
only for HPUX 11.31: output of ioscan -fnk while ioscan.txt contains output of ioscan -fN
output of irdiag-v for Raid4Si cards
lanscan, nwmgr, lanadmin, netstat outputs and netconf
with -net: additional files for hp_apa config
current raw logfile from the online diagnostics (has to be decoded with logtool/stm)
output of machinfo (IA64 system information)
Memory error log file (output of logtool commands vd and vda)
U320 SCSI interfaces: output of mptutil and mptconfig
output of netfmt -f /var/adm/nettl.LOG000 (only with -net option)
Output of rad -q or olrad -q
raw 11.31 diagnostic logfiles from /var/opt/psb/oselogs
parstatus, parstatus -c CELL -V, vparstatus, vparstatus -v, vparstatus -e
output of ps -ef and top
current and last boot logfile (/etc/rc.log)