Configuring Gts; Configuring The Line Rate - HP 6125G Configuration Manual

Step
4. Return to system view.
5. Create a behavior and enter
behavior view.
6. Configure a traffic policing
action.
7. Return to system view.
8. Create a policy and enter
policy view.
9. Associate the class with the
traffic behavior in the QoS
policy.
10. Return to system view.
11. Apply the QoS policy.

Configuring GTS

The Switch Series supports queue-based GTS, which shapes traffic of a specific queue.
To configure GTS:
Step
1. Enter system view.
2. Enter interface view.
3. Configure GTS for a queue.

Configuring the line rate

The line rate of a physical interface specifies the maximum rate of incoming packets or outgoing packets.
To configure the line rate:
Step
1. Enter system view.
Command
quit
traffic behavior behavior-name
car cir committed-information-rate [ cbs
committed-burst-size [ ebs
excess-burst-size ] ] [ pir
peak-information-rate ] [ green action ]
[ yellow action ] [ red action ]
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
•
Applying the QoS policy to an
interface
•
Applying the QoS policy to online
users
•
Applying the QoS policy to a VLAN
•
Applying the QoS policy globally
Command
system-view
interface interface-type
interface-number
qos gts queue queue-number cir
committed-information-rate [ cbs
committed-burst-size ]
Command
system-view
36
Remarks
N/A
N/A
N/A.
N/A
N/A
N/A
N/A
Choose one application
destination as needed.
Remarks
N/A
N/A
N/A
Remarks
N/A