Pc Card; Inserting An Expresscard; Removing An Expresscard - Toshiba Satellite Pro S850 Series User Manual

connection and utilizes the PCI Express interface that supports the reading
and writing of data at a theoretical maximum rate of 2.5Gbps.

Inserting an ExpressCard

The Windows hot-install feature allows you to insert ExpressCards while
the computer is turned on.
Do not insert an ExpressCard while the computer is in Sleep Mode or
Hibernation Mode as you may find that some cards do not work properly.
To insert an ExpressCard, follow the steps as detailed below:
1.
2.
3.
4.
5.

Removing an ExpressCard

To remove an ExpressCard, follow the steps as detailed below.
1.
2.
3.
4.
5.
When you do not use an ExpressCard, please be sure to insert a Dummy
card.

PC Card

The computer may be equipped with a single PC Card slot that can
accommodate a Type II format card. Any PC Card that meets industry
User's Manual
Press the Dummy card in order to eject the Dummy card partially out
of the computer.
Grasp the Dummy card and draw it.
Insert the ExpressCard into the ExpressCard slot on the left side of the
computer.
Press the ExpressCard gently to ensure a firm connection is made.
Figure 3-11 Inserting the ExpressCard
1. ExpressCard slot
After inserting the ExpressCard you should refer to its documentation
and also check the configuration in Windows in order to ensure that it
is correct.
Open the Safely Remove Hardware and Eject Media icon on the
Windows Taskbar.
Point to ExpressCard and click the left Touch Pad control button.
Press the ExpressCard in order to eject the ExpressCard partially out
of the computer.
Grasp the ExpressCard and remove it.
Insert the Dummy card into the ExpressCard slot.
1
2
2. ExpressCard
3-33