Axis 5900 User Manual page 71

AXIS 5900 User's Manual
Setting Parameters
Example:
Important:
In AppleTalk, you can change a limited number of the
parameters of the AXIS 5900. You can:
• enable and disable binary data transfers for your printing
• select the type of binary transfer protocol to use
• specify the AppleTalk printer type
• set the IP address
However, by assigning an IP address to your AXIS 5900, you
have access to all of print server's parameters via any standard
web browser or via FTP. Refer to Section 10 Management and
Configuration, on page 92 for more information.
The following example describes how you set the AXIS 5900
parameters in AppleTalk.
DO NOT use the parameter values from this example when configuring your AXIS
5900. You should select values that are appropriate for your printers and network
settings.
Follow the instructions below:
1. Open the Chooser from the Apple menu.
2. Select a network printer driver, any LaserWriter will do.
3. Select the printer port ending with "_CFG".
4. Close the Chooser.
5. Open a text editor, e.g. SimpleText.
6. Write a text file containing the parameters you want to set:
BINARY_TYPE_1.
INT_ADDR.
ATYPE_1.
Section 7 Setting Up - Macintosh
:BCP
:192.168.3.191
:EPSONLQ2
71