Turning On The Camcorder When The Power Save (Sleep) Mode Is Active - Toshiba CAMILEO SX500 User Manual

Turning on the camcorder when the power
save (sleep) mode is active
In order to preserve battery pack power, the power save (sleep) function will
automatically turn off the camcorder after about 1 minute of no use during
shooting, or about 5 minutes of no use during playback (factory-preset
setting).
i When the power save mode is active, you can restore the power by any of
the following methods:
h Press the POWER button.
h Press the [
h Open the monitor unit.
i After the power save mode has been active for about 1 hour, the
camcorder will switch to the standby mode. In this case, you can restore
the power by pressing the POWER button, or by closing and then opening
the monitor unit.
i When the AC adaptor is connected, the power save mode will become
active about 5 minutes after the camcorder is turned on (factory-preset
setting).
i When the camcorder is connected to a computer or printer, the power save
mode becomes active after about 12 hours.
EN
] button.
17 User's Manual