Turning The Tv On; Tuning The Tv For The Fi Rst Time - Toshiba 23PU200 series Owner's Manual

Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
Pin No. Signal name
1 R
2 G
3 B
4 NC (not
connected)
5 NC
6 Ground
7 Ground
8 Ground
• Most of the picture/sound controls and functions
are available. However features not available will
be greyed out.

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the
! power indicator lights in red (standby mode).
1
on the remote control or ! on the TV
Press
left side panel, the ! power indicator lights in
green.
Note:
If you watch black and white programmes when the
Colour System mode is set to "A" (Automatic), colour
noise may appear on the screen. In this case select the
appropriate Colour System (For the system of each
country or region, refer to pages 11, 29).
Switching off the TV
1
on the remote control or ! on the TV
Press
left side panel to switch to the standby mode.
Notes:
• When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
• The TV will automatically turn itself off after
approximately 15 minutes if it is tuned to a vacant
channel or a station that completes its broadcast
for the day. This function does not work in external
input or Blue screen Off mode.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
Pin No. Signal name
9 NC
10 Ground
11 NC
12 DDC Data
13 H-sync
14 V-sync
15 DDC Clock
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.

Tuning the TV for the fi rst time

Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected. To setup
the TV, use the buttons on the remote control as
detailed on page 7.
1
Press the
will appear. This screen will appear the fi rst time
that the TV is switched on.
Quick Setup
Language
2
Press  or  to select the menu language
(English, Chinese (CS), Malay, Thai, Vietnamese,
Russian, Arabic, Persian, French or Indonesia).
3
Press Q, to display the Location menu.
Press  or  to select Store or Home. For
normal home use, select Home.
You can select either Home or Store mode.
Home is recommended for normal home use.
Select Store when using a TV for displaying in
a shop, etc.
Location
To use the TV for displaying in
a store showroom, please select [Store].
[Home] mode is recommended
for normal use.
4
Press Q to display the Auto Signal Booster
menu, and then  or  to select Yes or No.
Auto Signal Booster
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this
feature to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes mode :
This function performs automatic distinction of
On or Off .
5
Press Q to display the Auto Tuning startup
screen. Press Q to start the automatic search.
Auto Tuning
Progress
1%
When the automatic search is completed,
the TV will automatically appear the Manual
Tuning menu.
Use the Manual Tuning operation if desired
channels cannot be preset with the Auto
– 10 –
button. The Quick Setup screen
English
Home
Yes
Found
0