Buffalo AirStation Nfiniti WZR-HP-AG300H User Manual page 19

Chapter 3 Installation
7
Once your computer has booted, the AirStation's LEDs should be lit as described below:
Power
2.4 GHz
5 GHz
Router
Diag
LAN
Internet
For LED locations, refer to chapter 1.
8
Launch a web browser. If the home screen is displayed, setup is complete.
If username and password fields are displayed, enter "root" for the user name. Enter "admin"
for the password if you're using the professional firmware (default), or leave the password
field blank if you've switched to the user-friendly firmware. Click [OK]. Step through the
wizard to complete setup.
You've completed initial setup of your AirStation. Refer to Chapter 4 for advanced settings.
Firmware Differences
You can choose between two different firmwares for your AirStation. By default, the professional
firmware (dd-wrt) is installed. If you prefer, you may install the user-friendly firmware instead. The
two firmwares have slightly different features, as shown in the chart below.
Function
Router mode switch functionality
Default administrator name
Default administrator password
AOSS
WPS
WDS
WZR-HP-AG300H User Manual
Green light on.
Green light on or amber light is on.
Green light on or amber light is on.
Green light on or off depending on your network.
Off
Green light on or blinking.
Green light on or blinking.
Professional firmware (dd-wrt)
─
root
admin
a
a
a
User-friendly firmware
a
root (fixed)
none
a
a
─
18