Format A Drive - Buffalo LinkStation User Manual

Using your LinkStation

Format a Drive

• A format deletes all data from a hard drive. Be careful! Back up any important data on a drive
before formatting it. It will take several minutes to format a hard drive.
• Shared folders cannot be accessed during formatting.
• Do not turn off the power switch or disconnect power while formatting a hard drive.
• If Auto power is set to [AUTO], then the LinkStation will turn off when the format is finished.
• To erase all data on a disk, choose [Disk Management] - [Erase Disk].
1
2
3
4
The [Confirm Operation] screen will be displayed. Type the displayed number into the
[Confirmation Number] field within 60 seconds, then click [Apply].
5
Follow the instructions displayed on the screen.
LinkStation User Manual
In the configuration utility, navigate to [System] -
[Storage].
1 Select the drive to format.
2 Click [Format Disk].
Click [Format].
30