Preparing Washing Machine; Before Using Your Washing Machine For The First Time - Siemens IQ 100 Operating And Installation Instruction

Before using your washing
machine for the first time
Preparing your
washing machine
Attention
The washing machine must have been installed and
connected properly (refer to page 34).
i The washing machine was tested before leaving
the factory. To remove any water left over from
testing procedures, the first washing cycle should
be carried out without laundry in the machine.
q Turn the tap on.
q Pull out the detergent drawer all the way.
q Pour approx. 1 litre of water into chamber II of the
detergent dispenser.
q Half fill the measuring beaker with detergent and
pour into chamber II.
i Do not use any special detergents for delicates or
woollens (excessive foam).
q Close the detergent drawer.
q Close the washing machine door.
q Set the programme selector to
Cottons/Coloureds 90 C +Prewash.
Ready/Wash" indicator light flashes.
q Press the Start Pause" button.Ready/Wash"
and Start Pause" indicator lights are on.
The programme starts.
q The programme is ended if Spin/End" indicator
light flashes.
Turn the programme selector to Off.
9