Appliance Self-Test; Customer Service - Siemens KG36VVI30G Instructions For Use Manual

en
Fault
The temperature
in the refrigerator
compartment is too
cold.
Floor of
the refrigerator
compartment is wet.
The freezer
compartment has
a thick layer of frost.
The temperature in
the freezer
compartment is too
warm.

Appliance self-test

Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
1. Switch off the appliance and wait 5
minutes.
2. Switch on the appliance and hold
down the temperature selection
button, Fig. 2/4, for 3–5 seconds
within the first 10 seconds until 2 °C
is lit on the refrigerator compartment
temperature display.
The self-test programme starts, when
the temperature displays lit up in
succession.
16
Possible cause
Temperature has been
set too low.
The condensation
channels or drainage
hole are blocked.
Appliance opened
frequently.
The ventilation
openings have been
covered.
Large quantities of
fresh food are being
frozen.
Remedial action
Increase the temperature.
Clean the condensation channels
and the drainage hole. See chapter
Cleaning the appliance. Fig. .
Defrost the freezer compartment
(see chapter Defrosting). Always
ensure that the freezer compartment
door is closed properly.
Do not open the appliance
unnecessarily.
Remove obstacles.
Do not exceed max. freezing
capacity.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the Super display flashes for 10
seconds, an error has occurred.
Inform customer service.
Ending the appliance self-test
When the programme has ended, the
appliance switches over to normal
operation.

Customer service

Your local customer service
can be found in the telephone directory
or in the customer-service index. Please
provide customer service
with the appliance product number
(E-Nr.) and production number (FD).