Toshiba Qosmio PX30t Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Desktop
  5. Qosmio PX30t Series
  6. User manual

Toshiba Qosmio PX30t Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User's Manual
TOSHIBA PX30t/PX35t
Qosmio PX30t
series

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Qosmio PX30t Series

Summary of Contents for Toshiba Qosmio PX30t Series

  • Page 1 User's Manual TOSHIBA PX30t/PX35t Qosmio PX30t series...

  • Page 2: Table Of Contents

    The Keyboard ..................4-2 Remote Controller ................. 4-5 Optical disc drives ................4-12 TOSHIBA VIDEO PLAYER ..............4-19 TOSHIBA Blu-ray Disc Player ............4-21 3D Playback on an External 3D Device ..........4-23 TV Tuner ....................4-28 Battery ....................4-29 LAN .......................
  • Page 3 TOSHIBA System Settings ..............5-10 USB Charge ..................5-11 Sleep and Music .................. 5-13 TOSHIBA Media Player by sMedio TrueLink+ ........5-14 Using CyberLink MediaShow 6 for TOSHIBA ........5-15 TOSHIBA PC Health Monitor .............. 5-17 TOSHIBA Gesture Controller .............. 5-18 AirGet for TOSHIBA ................

  • Page 4: Chapter 1 Toshiba Legal, Regulatory And Safety

    TOSHIBA computers. Copyright, Disclaimer and Trademarks Copyright © 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 5: Regulatory Information

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

  • Page 6: Fcc Conditions

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s External RGB monitor port, Universal Serial Bus (USB...
  • Page 7 EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards.
  • Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 9 The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.

  • Page 10: Video Standard Notice

    For more detailed information about recycling of this product, please visit our website (http://www.toshiba- india.com) or contact call center (1800-200-8674). These symbols may not stick depending on the country and region where you purchased.
  • Page 11 ------------------------ /*===================================================== Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 12 ---------------------------------- /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.

  • Page 13: Energy Star Program

    ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency. Your computer...

  • Page 14: Disposing Of The Computer And The Computer's Batteries

    Disposing of the computer and the computer's batteries Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the batteries. Optical disc drive safety instructions Be sure to check the precautions at the end of this section.

  • Page 15: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

  • Page 16: Cleaning The Computer

    To keep your computer in prime operating condition, protect your work area from: Dust, moisture, and direct sunlight. Equipment that generates a strong electromagnetic field, such as stereo speakers (other than speakers that are connected to the computer) or speakerphones. Rapid changes in temperature or humidity and sources of temperature change such as air conditioner vents or heaters.

  • Page 17: Moving The Computer

    You can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth and then wiping the screen gently with the cloth. Never spray cleaner directly onto the computer or let liquid run into any part of it.

  • Page 18: Safety Icons

    Safety Icons Safety icons are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions. A caution informs you that improper use of equipment or failure to follow instructions may cause data loss, equipment damage, or may result in minor or moderate injury.

  • Page 19: Chapter 2 Getting Started

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.

  • Page 20: Using Your Computer For The First Time

    Click Left click the mouse once. Tap the touch screen once (only for touch screen models). Right-click Right click the mouse once. Press and hold on the touch screen (only for touch screen models). Double-click Left click the mouse twice. Tap the touch screen twice (only for touch screen models).

  • Page 21: Connecting The Ac Adaptor

    DC power and reduces the voltage supplied to this computer. Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 22 Never place your computer or AC adaptor on a wooden surface, furniture, or any other surface that could be marred by exposure to heat since the computer base and AC adaptor's surface increase in temperature during normal use. Always place your computer or AC adaptor on a flat and hard surface that is resistant to heat damage.
  • Page 23 Connect the AC adaptor’s DC output plug to the DC IN 19V jack on your computer. Figure 2-3 Connecting the DC output plug to the computer 1. DC IN 19V jack 2. DC output plug Product appearance depends on the model you purchased. Plug the power cord into a live wall outlet - the Power indicator on the front of the computer should glow.
  • Page 24 Put an AAA battery into the battery groove of the mouse. Figure 2-4 Installing the battery of the mouse 1. Battery cover 2. Battery Close the battery cover. Installing the battery of the keyboard Open the battery cover on your wireless keyboard. Put an AAA battery into the battery groove of the keyboard.

  • Page 25: Turning On The Power

    Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Power Condition Descriptions section for more information. After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 26: Turning Off The Power

    Charms Use the Windows Charms to start apps, find documents, set up system components, and perform most other computing tasks. By pointing the mouse pointer to the upper or lower right corner of your screen, you will find a list of charms: Search, Share, Start, Devices and Settings.

  • Page 27: Restarting The Computer

    If you have entered data, either save it to the Hard Disk Drive or to other storage media. Make sure all disk/disc activity has stopped before removing the disk/ disc. If you turn off the power while a disk (disc) is being accessed, you may lose data or damage the disk.
  • Page 28 Please note that keyboard keys can only be used if the Wake- up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.

  • Page 29: Hibernation Mode

    When the computer is in Sleep Mode, the Power indicator will blink white. Sleep Mode limitations Sleep Mode will not function under the following conditions: Power is turned back on immediately after shutting down. Memory circuits are exposed to static electricity or electrical noise. Hibernation Mode The Hibernation Mode feature saves the contents of memory to the Hard Disk Drive when the computer is turned off so that, the next time it is turned...
  • Page 30 In order to show Hibernate in Power menu, you need to setup according to the following steps: 1. Click Desktop -> Desktop Assist -> Control Panel -> System and Security -> Power Options. 2. Click Choose what the power button does. 3.

  • Page 31: Chapter 3 The Grand Tour

    Chapter 3 The Grand Tour This chapter identifies the various components of the computer - it is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, please refer to the Legal Footnotes section.
  • Page 32 Figure 3-1 Front side of the computer 1. Wireless communication antennas 6. Microphone* (not shown)* 2. Microphone 7. Display screen 3. Web Camera LED 8. CIR in Window* 4. Web Camera 9. Power button 5. Ambient light sensor* * Provided with some models. Product appearance depends on the model you purchased.

  • Page 33: Left Side

    Microphone The built-in microphone allows you to import and record sounds for your application - please refer to the Sound System and Video mode section for more information. Web Camera LED The Web Camera LED glows when the Web Camera is operating. Web Camera Web Camera is a device that allows you to record video or take photographs with your...
  • Page 34 Figure 3-2 The left side of the computer 1. Display off button 6. Volume down button 2. AV select button 7. Memory media slot 3. Brightness up button 8. Headphone jack 4. Brightness down button 9. Microphone jack 5. Volume up button 10.Universal Serial Bus (USB 3.0) ports Display off button Press this button to turn off the computer’s...
  • Page 35 Volume up button Press this button to increase the computer’s volume. Volume down button Press this button to decrease the computer’s volume. Memory media slot This slot lets you insert an SD™/SDHC™/ SDXC™ memory card, miniSD™/microSD™ Card and MultiMediaCard™. Refer to the Memory media section for more information.

  • Page 36: Right Side

    Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. Some functions associated with a specific device might not operate properly. USB 3.0 port(s) may work as USB 2.0 port(s) when operating in USB Legacy Emulation mode.
  • Page 37 Figure 3-4 The back of the computer 1. Cooling vents 5. Universal Serial Bus (USB 2.0) ports 2. TV antenna jack* 6. Universal Serial Bus (USB 3.0) ports 3. HDMI out port* 7. LAN jack 4. HDMI in port 8. DC IN 19V jack * Provided with some models.
  • Page 38 TV Tuner jack Connect the coaxial cable to this port to watch TV programs on your computer or record them. The dimensions and shape of the TV Tuner jack vary for different regions. Some models are equipped with a TV tuner. HDMI out port HDMI out port can connect with Type A connector HDMI cable.

  • Page 39: Wireless Keyboard

    DC IN 19V jack The AC adaptor connects to this socket to power the computer. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase (depends on the model you purchased) - using the wrong AC adaptor can cause damage to the computer.
  • Page 40 Battery This indicator glows for nine to ten seconds when indicator(keyboard) keyboard is turned on. Blinking for five seconds shows the battery of the keyboard is low. And fast blinking for two seconds and then going off shows the battery of the keyboard is exhausted. Underside The following figure shows the underside of the wireless keyboard.

  • Page 41: Wireless Mouse

    Wireless Mouse Front The following figure shows the front of the wireless mouse. Figure 3-9 Front of the wireless mouse 1. Left button 3. Middle button 2. Right button Right button Used for normal right controls of the mouse. Left button Used for normal left controls of the mouse.

  • Page 42: Internal Hardware Components

    The processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Health Monitor utility by clicking Desktop -> Desktop Assist -> Support & Recovery -> PC Health Monitor, and then click PC Information.
  • Page 43 Video RAM The memory in a computer's graphics adaptor, used to store the image displayed on a bitmap display. The amount of Video RAM available is dependent on the computer's system memory. Desktop -> Desktop Assist -> Control Panel -> Appearance and Personalization ->...

  • Page 44: Power Condition Descriptions

    Please use the default setting for NVIDIA Optimus technology. If the program does not run normally after the setting has been changed, please restore the program to the default setting. If the program does not run normally, please restore the Preferred graphics processor to the default setting.
  • Page 45 No light Under any other conditions, the indicator does not light. User's Manual 3-15...

  • Page 46: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that should be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen.

  • Page 47: The Keyboard

    The computer will indicate the NUM LOCK, CAPS LOCK, SCROLL LOCK and Keyboard Battery status by showing icons in the lower right corner of the screen. You can turn the icons on/off by clicking TOSHIBA Keyboard Indicator ( ) in the notification area on the taskbar. NUM LOCK...

  • Page 48: Function Key

    Keyboard Battery The Keyboard Battery icon shows the keyboard battery four status as below: : Good level : Low level : Critical level : Unknown If the computer resumes from hibernation/hybrid sleep mode without keyboard operation, the keyboard battery icon will show as unknown. In this case, you can press any key on the keyboard to update the battery icon to the current status.
  • Page 49 Launches Internet browser /Eco ® utility / Intel WiDi or changes the active display device according to the setting in TOSHIBA Button Support utility. The provided options in TOSHIBA Button Support utility will be different depending on the models. FN + F5 Launches the Media Player / Eco ®...

  • Page 50: Remote Controller

    You can use your remote controller with a media player (such as ArcSoft TV5.0, TOSHIBA VIDEO PLAYER, TOSHIBA Blu-ray Disc Player, etc) to play discs and videos, or to watch and record television programs.
  • Page 51 Figure 4-1 Full size remote controller 1. Play 9. More info 17. Clear 25. Rewind 2. Pause 10. OK 18. Recorded TV 26. Record 3. Access indicator 11. Mute 19. Guide 27. Blue 4. Power 12. Channel/Page 20. Volume - 28.
  • Page 52 Figure 4-2 Slim remote controller 1. Power 8. Red Button 14. Channel/Page 20. Pause Control 2. Start 9. Green Button 15. Arrows and OK 21. Stop 3. Teletext 10. Yellow Button 16. Mute 22. Volume Control 4. Recorded TV 11. Blue Button 17.
  • Page 53 Record Records the selected television program and stores it on your hard disk drive. Stop Stops the media currently playing. Pause Pauses an audio or video track, and live or recorded TV programs. Play Plays the selected media. REW (Rewind) Moves the media (video, disc, music, and so on) backwards.

  • Page 54: Using The Remote Controller

    Recorded TV Allows you to switch to the Recorded TV screen if the ArcSoft TV 5.0 window is active. Guide Allows you to switch to the Electronic Program Guide (EPG) screen if the ArcSoft TV 5.0 window is active. Live TV Allows you to switch to the Live TV screen if the ArcSoft TV 5.0 window is active.
  • Page 55 Figure 4-3 Operational range of the remote controller Vertically Vertically 1. CIR in Window 2. Remote controller Product appearance depends on the model you purchased. The appearance of the provided Remote Controller may vary depending on the model you purchased. Even if the remote controller is within the effective range as described above, it may malfunction or not work correctly in the following cases.
  • Page 56 Do not use a battery whose "recommended expiration date" has been reached, or which is completely discharged. Do not use different types of batteries or old and new batteries at the same time. Do not carry the battery together with metal necklaces, hairpins or other metal accessories.

  • Page 57: Optical Disc Drives

    Close the battery cover securely until it clicks. Figure 4-6 Closing the battery cover 1. Battery cover Replacing battery for slim remote controller: Press and hold the battery tray lock on the back side of the remote controller, and then pull the battery tray as shown below. Figure 4-7 Pulling the battery tray 1.

  • Page 58: Using Optical Disc Drives

    DVD Super Multi drive The drive supports the following formats: CD-ROM, DVD-ROM, DVD- Video, CD-DA, CD-Text, Photo CD™ (single/multi-session), CD-ROM Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD- EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD-R DL (Format1), DVD+R DL.
  • Page 59 Grasp the disc tray gently and pull until it is fully opened. Figure 4-9 Pressing the eject button and pulling the disc tray open 1. Eject button 2. Disc tray Lay the disc in the disc tray with its label facing to the front of the computer.

  • Page 60: Removing Discs

    If the disc is not seated properly when the disc tray is closed, the disc might be damaged. Also, the disc tray might not open fully when you press the eject button. Removing discs To remove the disc, follow the steps as detailed below: Do not press the eject button while the computer is accessing the optical disc drive.

  • Page 61: Writable Discs

    - this may cause you to either lose data or incur other damage to the drive or media. Disclaimer TOSHIBA does not assume responsibility for the following: User's Manual 4-16...

  • Page 62: Before Writing Or Rewriting

    Please also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd.

  • Page 63: When Writing Or Rewriting

    DVD-RW: DVD Specifications for Recordable Disc for Version 1.1 or version Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media) MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed media) DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media) DVD-RAM: (DVD Super Multi drive only) DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2...

  • Page 64: Toshiba Video Player

    Keep mobile phones and other wireless communication devices away from the computer. TOSHIBA VIDEO PLAYER Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER: Notes on use This software can only be used on Windows 8.
  • Page 65 Do not lock the computer using the Windows logo ( ) + L keys when running the TOSHIBA VIDEO PLAYER. The TOSHIBA VIDEO PLAYER does not have a parental control function. In order to protect copyrights, the Windows Print Screen function is disabled when TOSHIBA VIDEO PLAYER is running.

  • Page 66: Toshiba Blu-Ray Disc Player

    TOSHIBA VIDEO PLAYER features and instructions are explained in details in TOSHIBA VIDEO PLAYER Manual. Use the following procedure to open TOSHIBA VIDEO PLAYER Manual. Press the F1 key when TOSHIBA VIDEO PLAYER is launched and click the Help button. TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu- ray Disc Player.
  • Page 67 When you purchase Blu-ray™ Video, make sure it matches your drive, otherwise it will not play properly. To playback video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port.

  • Page 68: 3D Playback On An External 3D Device

    TOSHIBA Blu-ray Disc Player Manual. Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual. Press the F1 key when TOSHIBA Blu-ray Disc Player is launched and click the Help button. 3D Playback on an External 3D Device 3D playback on an external 3D device feature is only provided with some models.
  • Page 69 2D home video and other 2D contents you created, in 3D according to your personal preferences. The TOSHIBA VIDEO PLAYER is set by default in the 2D format. By pressing the 2Dto3D conversion function button, you decide to activate the 2Dto3D conversion function and therefore decide to watch your 2D content in 3D.
  • Page 70 The protection of intellectual property rights is essential for TOSHIBA. In this respect, TOSHIBA underlines that the Player should not be used in a manner infringing such rights. It is your...
  • Page 71 The picture generated by 2Dto3D conversion function is not the same as a picture produced for 3D playback use. The 2Dto3D conversion function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content. The Player is set by default in the 2D format. By pressing the 2Dto3D...
  • Page 72 Depending on the system environment, the player may automatically switch into 2D if you perform any of the following operations during 3D playback. Furthermore, you may experience some time lag when the switching occurs. - Opening windows or pop-ups such as [Right-Click Menu], [Settings Window], [File Select] or [Error Message].

  • Page 73: Tv Tuner

    TV Tuner Use the ArcSoft TV 5.0 to watch TV programs or record them. The dimensions and shape of the TV Tuner jack vary for different regions. Some models are equipped with a TV tuner. Some computer models are equipped with a tuner capable of receiving digital broadcasts.

  • Page 74: Battery

    Figure 4-12 Connecting the coaxial cable 1. TV Tuner jack 2. Coaxial cable Product appearance depends on the model you purchased. When you have been using a descrambler to receive the programs on cable TV or satellite broadcasting, connect the set-top box and splitter to the coaxial cable.

  • Page 75: Lan Cable Types

    Do not install or remove a memory module while Wake-up on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. The Link speed (10/100/1000 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on).

  • Page 76: Additional Memory Module

    When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove memory module under the following conditions.

  • Page 77: Installing Memory Module

    Additional memory module is a precision electronic component that may be fatally damaged by static electricity. Since the human body can carry static electricity, it is important that you discharge yourself before touching or installing any additional memory modules. To discharge your body’s static electricity, simply touch any metal close to you with bare hands.
  • Page 78 Remove the back cover, then you can access the memory modules as in the place in the picture below. Figure 4-15 Removing the back cover 1. Memory modules User's Manual 4-33...

  • Page 79: Removing Memory Module

    Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-16 Seating the memory module 1.

  • Page 80: Memory Media

    Click Power in the Settings charm, and then click Shut down while holding down the SHIFT key - ensure that the Power indicator is off. Remove the AC adaptor and all cables and peripherals connected to the computer. Turn the computer upside down. Slide your fingernails or thin objects under the cover and lift the whole back on to open the large cover, then you can access the memory modules.
  • Page 81 Keep foreign objects out of the memory media slot. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or Keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. Please note that an adaptor is required to use miniSD/microSD Card.

  • Page 82: Media Care

    Memory media format New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting a memory media card Memory media cards are sold already formatted in conformity to specific standards.

  • Page 83: Inserting Memory Media

    Set the write-protect switch to the lock position, if you do not want to record data. Inserting memory media The following instructions apply to all types of supported media devices. To insert memory media, follow the steps as detailed below: Turn the memory media so that the contacts (metal areas) are facing backwards.

  • Page 84: The Hdmi Out Port

    If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media. Do not remove the memory media while the computer is in Sleep or Hibernation Mode.
  • Page 85 Please do not plug/unplug an HDMI device under the following conditions: The system is starting up. The system is shutting down. When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it, please wait at least 5 seconds before you re-plug the HDMI cable again.

  • Page 86: The Hdmi In Port

    The HDMI in port Devices equipped with an HDMI output port, such as camcorders or notebooks, can be connected to the HDMI in port on the computer. To connect HDMI device, follow the steps as detailed below: Plug one end of the HDMI cable into the HDMI out port of the digital device.

  • Page 87: Optional Toshiba Accessories

    For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: Universal AC Adaptor If you frequently use your computer at more than...

  • Page 88: Power Management

    If you feel the microphone volume level is inadequate, move the Microphone Boost slider to a higher level. Audio Enhancements In order to apply the sound effects for your current speaker, follow the steps below. Click Desktop and right click on the Speakers icon on the Taskbar, and then select Playback devices from the sub menu.

  • Page 89: Video Mode

    DTS Studio Sound DTS Studio Sound™ is a premium audio enhancement suite that utilizes revolutionary audio technology to provide the most immersive and realistic listening experience ever offered for a two speaker playback environment. DTS Studio Sound provides the following features: Advanced audio rendering to match 2D and 3D video content for enveloping surround sound Accurate placement of audio cues for immersive surround sound from...

  • Page 90: Chapter 5 Utilities And Advanced Usage

    Assist. Furthermore, some utilities can also be launched from Start screen and desktop shortcut. TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier.
  • Page 91 To access this utility, click Desktop -> Desktop Assist -> Tools & Utilities -> System Settings. TOSHIBA HDD TOSHIBA HDD Accelerator is a utility that can Accelerator improve hard drive access performance by using part of the main memory of the computer as a cache.
  • Page 92 To access this utility, click Desktop -> Desktop Assist -> Tools & Utilities -> eco Utility. For details on TOSHIBA eco utility, see the help file. TOSHIBA Blu-ray This software is provided for playback of Blu-ray Disc Player Disc™.
  • Page 93 To start this utility, type CyberLink from the Start screen, and then click the CyberLink MediaShow 6 for TOSHIBA from the list that appears. For details on how to use CyberLink MediaShow, see the help file by clicking ? button in the main window.
  • Page 94 TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited...

  • Page 95: Special Features

    To access the setup files of the drivers/utilities, type Applications from the Start screen, and then click Applications and Drivers from the list that appears. TOSHIBA Media Player by sMedio TrueLink+ application is not included in the setup files above but can be downloaded from Windows Store. Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use.
  • Page 96 System automatic This feature automatically shuts down the system Sleep/Hibernation into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a Mode specified time. This can be specified in the Power Options. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.

  • Page 97: Toshiba Password Utility

    TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User Password To start the utility, click the following items: Desktop ->...
  • Page 98 To end the BIOS Setup, press F10 and then press ENTER to accept the changes. The computer will restart. If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE.

  • Page 99: Toshiba System Settings

    To run TOSHIBA System Settings, click Desktop -> Desktop Assist -> Tools & Utilities -> System Settings. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition there are also three buttons: OK, Cancel and Apply.

  • Page 100: Usb Charge

    TOSHIBA System Settings window. Some options shown in grey are possible to confirm their status. TOSHIBA System Settings screen may have the following tabs: General—Allows you to view the current BIOS version or change certain settings back to their default values Sleep and Charge/Sleep and Music—Allows you to set advanced...
  • Page 101 compatible port even when the computer is turned OFF. "Power OFF" includes Sleep Mode, Hibernation Mode or shutdown state. To set USB Sleep and Charge feature, click Desktop -> Desktop Assist - > Tools & Utilities -> System Settings -> Sleep and Charge. Move the slider to enable or disable the Sleep and Charge function.

  • Page 102: Sleep And Music

    maximum 2.0A to the compatible ports while the computer is turned off. When USB device cannot be charged by Auto Mode, change to Alternate Mode. This function may not be able to be used with some connected external devices even if the appropriate mode is selected. In this situation, disable and stop using this function.

  • Page 103: Toshiba Media Player By Smedio Truelink

    Sound quality may also be different. Use the Sleep and Music function with the display open. TOSHIBA Media Player by sMedio TrueLink+ Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink+: Notes on use This software is a multimedia player which can be used to play back video, music and photo.

  • Page 104: Using Cyberlink Mediashow 6 For Toshiba

    Operating TOSHIBA Media Player by sMedio TrueLink+ The steps for playing a video file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player. Click a video file to playback. The steps for playing a music file on a local library: Click My Local Library on the Start Page of TOSHIBA Media Player.

  • Page 105: Important Information For Use

    Type CyberLink from the Start screen, and then click CyberLink MediaShow 6 for TOSHIBA from the list that appears. Insert a DVD-R, DVD+R, DVD-RW, DVD+RW, BD-R or BD-RE disc into the optical disc drive. Add your media files by dragging it to Media Tray.

  • Page 106: Toshiba Pc Health Monitor

    An Internet connection is required for uploading and downloading. TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption and the system cooling, informing you of significant system conditions. This application recognizes the system and individual component serial numbers, and will track specific activities related to the computer and their usage.

  • Page 107: Toshiba Gesture Controller

    Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD/SSD.

  • Page 108: Notes On Use

    Small hand(e.g.kids’) may not be detected properly. Starting TOSHIBA Gesture Controller The TOSHIBA Gesture Controller can be started using the following methods: Click the TOSHIBA Gesture Controller icon on the Start screen.
  • Page 109 Gestures performed outside the effective operational range may be missed or incorrectly detected . Moving too fast may cause losing detection. Moving something other than a hand fast in front of the camera, might be treated as a swipe action by the software. Only one hand operation is supported.

  • Page 110: Airget For Toshiba

    The software should be disabled or exited if you want to use other applications based on camera. Configuring TOSHIBA Gesture Controller Right-click the TOSHIBA Gesture Controller icon in the taskbar of your Windows desktop, and then select one of the following options from the menu.
  • Page 111 If you tap the upload/download button during video playback, the current video will restart playback from the beginning. Preparation Before using AirGet for TOSHIBA, you need to install AirGet for TOSHIBA in your mobile device and pair the device with your computer by the following steps: Make sure both computer and mobile device have internet connections.

  • Page 112: System Recovery

    Tap Upload icon on upper right corner to upload the file. If you cannot see any menu, tap screen then the menu bar will appear. How to learn more The features and operations are explained in the AirGet for TOSHIBA Manual. To open this manual, click the help icon on the About screen.
  • Page 113 Be sure to close all other software programs except the Recovery Media Creator. Do not run software such as screen savers which can put a heavy load on the CPU. Operate the computer at full power. Do not use power-saving features. Do not write to the media when the virus check software is running.
  • Page 114 Restoring the pre-installed software from your created Recovery Media If the pre-installed files are damaged, you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below: When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost.

  • Page 115: Recovery Hard Disk Drive

    If you have not created "Recovery Media", please contact TOSHIBA support for assistance. Restoring the pre-installed software from the Recovery Hard Disk Drive A portion of the total Hard Disk Drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem.

  • Page 116: Troubleshooting

    In reality many problems can be solved simply, but a few may require help from TOSHIBA Support - if you find you need to consult others, be prepared to describe the problem in as much detail as possible.

  • Page 117: Analyzing The Problem

    Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made will help to identify the problem faster.

  • Page 118: If Something Goes Wrong

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 119: Hardware And System Checklist

    If the indicator is glowing, the computer is on. Also, try turning the computer off and then on. If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the Power indicator. If the indicator is glowing, the computer is connected to a live external power source.

  • Page 120: Ac Power

    If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the power indicator.

  • Page 121: Real Time Clock

    (remapping involves changing or reassigning the function of each key). If you are still unable to use the keyboard, you should contact TOSHIBA Support. Internal display panel Apparent computer's display panel problems may be related to the computer's setup and configuration - please refer to the...

  • Page 122: Hard Disk Drive

    - if so remove it and try to start the Drive computer again. If this has no effect, check the Boot Priority Options setting within the TOSHIBA System Settings. Slow performance The files on the Hard Disk Drive may be...

  • Page 123: Pointing Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse.

  • Page 124: Usb Device

    If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, please also refer to the documentation supplied with your USB device.
  • Page 125 Sleep and Charge Enable the Sleep and Charge function in the function. TOSHIBA System Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.

  • Page 126: Sound System

    Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. External monitor Please also refer to Operating Basics, and to the documentation supplied with your monitor for further information.
  • Page 127 Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub.

  • Page 128: Toshiba Support

    TOSHIBA Support. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 129 TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related, visit TOSHIBA technical support website http://www.toshiba.co.jp/ worldwide/. User's Manual 6-14...

  • Page 130: Appendix Specifications

    Chapter 7 Appendix Specifications This section summarizes the computer’s technical specifications. Physical Dimensions Physical Dimensions shown below do not include parts that extend beyond the main body. The physical dimensions may vary depending on the model you purchased. Size 552 (w) x 165 (d) x 391 (h) millimeters (not including parts that extend beyond the main body).

  • Page 131: Ac Power Cord And Connectors

    AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Wire size: Minimum 0.75 mm...

  • Page 132: Information For Wireless Devices

    United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision a/b/n or b/g/ n), as defined and approved by the Institute of Electrical and...

  • Page 133: Wireless Devices And Your Health

    If you should experience any such problem, immediately turn off either one of your Bluetooth or Wireless LAN. Please visit http://www.pc.support.global.toshiba.com, if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA. In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy.

  • Page 134: Card Specifications

    TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications...

  • Page 135: Bluetooth Wireless Technology

    Radio Frequency Band 5GHz (5150-5850 MHz) (Revision a and n) Band 2.4GHz (2400-2483.5 MHz) (Revision b/g and n) The range of the wireless signal is related to the transmit rate of the wireless communication. Communications at lower transmit range may travel larger distances.

  • Page 136: Radio Regulatory Information

    Radio Regulatory Information The Wireless device must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This product complies with the following radio frequency and safety standards. Europe Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe France:...
  • Page 137 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
  • Page 138 check the current channel of operation. If operation is occurring outside of the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
  • Page 139 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.

  • Page 140: Device Authorization

    2.4 : This equipment uses a frequency of 2.4GHz. DS : This equipment uses DS-SS modulation. OF : This equipment uses OFDM modulation. 4 : The interference range of this equipment is less than 40m. : This equipment uses a frequency bandwidth from 2,400MHz to 2,483.5MHz.

  • Page 141: Legal Footnotes

    This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the table below, please contact TOSHIBA Support. As of March 2013 Austria...
  • Page 142 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.

  • Page 143: Wireless Lan

    Various system components (like the video adapter’s GPU and PCI devices like Wireless LAN, etc.) require their own memory space. Since a 32-bit operating system cannot address more than 4 GB of memory, these system resources overlap the physical memory. It is a technical limitation that the overlapped memory is not available to the operating system.

  • Page 144: Glossary

    Copy Protection Applicable copy protection standards included in certain media may prevent or limit recording or viewing of the media. Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations Alternating Current AMT: Intel Active Management Technology ASCII:...
  • Page 145 HDMI CEC: High-definition Multimedia Interface Consumer Electronics Control HTML: Hypertext Markup Language IEEE: Institute of Electrical and Electronics Engineers I/O: Input/Output IRQ: interrupt request ISP: Internet Service Provider kilobyte LAN: Local Area Network LCD: Liquid Crystal Display LED: Light Emitting Diode megabyte MBps: megabytes per second...
  • Page 146 WSXGA: Wide Super Extended Graphics Array WSXGA+: Wide Super Extended Graphics Array Plus WUXGA: Wide Ultra Extended Graphics Array WXGA: Wide Extended Graphics Array WXGA+: Wide Extended Graphics Array Plus www: World Wide Web XGA: Extended Graphics Array User's Manual 7-17...

  • Page 147: Index

    Index problems 6-11 AC adaptor additional 4-42 connecting 2-3 Function key DC IN 19V jack 3-9 Function keys F1...F12 4-3 Battery Hard Disk Drive 3-12 real time clock 3-12, 4-29 Hard disk drive automatic power off 5-6 Bluetooth 7-6 HDMI out port 3-8 Cleaning the computer 1-13 Cooling vents 3-7, 3-9 Keyboard...
  • Page 148 Sound system Sleep Mode 2-9 problems 6-11 turning off 2-8 turning on 2-7 Problems AC power 6-5 TOSHIBA Desktop Assist 5-1 Analyzing the problem 6-2 Dual Pointing device 6-8 TV Tuner jack External monitor 6-11 Hardware and system checklist 6-4...
  • Page 149 Video RAM 3-13 Web Camera 3-3 Wireless communication 7-4 User's Manual Index-3...

This manual is also suitable for:

Px35t

Table of Contents