Troubleshooting - Doyon PIZ3G Instructions Manual

Hide thumbs Also See for PIZ3G:
Table of Contents

Advertisement

Always cut off the main power before replacing any parts.
Control parts on the front control:
Gas and motor system on the back of oven:
Questions
The oven does not turn on.
The oven does not produce heat.
A12

TROUBLESHOOTING

BEFORE CALLING FOR SERVICE
ANSWERS TO MOST FREQUENT QUESTIONS
Remove the hood control panel of the oven by
screwing out the screws.
Pull the oven and screw out of the back panels.
Solutions
Check the breakers on the front panel.
Check the breakers of the building.
Check if the doors are tightly closed.
Check the motor fuses and the overload relays
located in the electrical control panel.
• Make sure the thermostat is adjusted to a
temperature high enough to turn on the pilot
light.
1. If the oven blowers are not on, check the
overload relays located in the control
compartment.
If
disengaged, call for a qualified technician.
E. .
If the oven blowers are on:
• Check that the manual shut-off valve is open
correctly.
To start it over, simply put the thermostat to the
"OFF" position, wait at least 10 seconds, then
reset it at the desired temperature. The burner
will start up and you can see the flame through
the hole near the gas input. You can repeat this
operation three times. If it does not start up
again, contact our company or a certified gas
technician.
anyone
of
these
is

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Piz6gPiz3Piz6

Table of Contents