1. Manuals
  2. Brands
  3. Lanzar Manuals
  4. Car Video System
  5. SDIN74DU
  6. User manual

Lanzar SDIN74DU User Manual

7'' motorized touch screen tft/lcd monitor with dvd/cd/mp3/mp4/am/fm player
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SDIN74DU User Manual
PRECAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert
The exclamation point within an equilateral triangle is intended to alert user to the presence of
!
Laser product symbol: located on the rear panel of the unit, indicate this player is a class
laser product, only use weak laser and no hazardous radiation outside of the unit.
1.Read through this instruction manual before installation and use.
2.Before removing the unit, remove the disc from the unit first.
3.Do not open the cover or touch any of the components exposed out of the unit, only for
qualified technicians.
4.Do not expose the unit to direct sunlight or nearby objects that radiate heat to avoid
damage the unit.
5.Do not place the unit in moist and humid conditions.
6.Please ensure the ventilation holes are not covered to avoid overheating and
malfunction.
7.Clear the panel and case with soft dry cloth only, do not apply any kind of thinner,alcohol
or sprays.
PDF created with FinePrint pdfFactory trial version
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
the user to the presence of uninsulated dangerous voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock
to persons.
important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
CLASS 1 LASER PRODUCT
WARNING: TO REDUCE THE
RISK OF FIRE OR ELECTRIC
!
SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE.
1
http://www.pdffactory.com

Advertisement

Table of Contents
loading

Related Manuals for Lanzar SDIN74DU

Summary of Contents for Lanzar SDIN74DU

  • Page 1 SDIN74DU User Manual PRECAUTION WARNING: TO REDUCE THE CAUTION RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE RISK OF ELECTRIC SHOCK THIS APPLIANCE TO RAIN OR DO NOT OPEN MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

  • Page 2: Table Of Contents

    Contents 1. Before Operation...................3 Glossary....................3 Precautions..................3 Maintenance and Cleaning of Discs.............4 Battery Information of the Remote Control........... 4 The Remote Control Description............5 The Locations and Names of Controls on or in the Unit......6 Wires Connection Description..............7 Unit Installation..................8 2. Common Operation...................9 3.

  • Page 3: Before Operation

    1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs containing PBC, It can playback interactive software with the menu displayed on monitor screen.

  • Page 4: Maintenance And Cleaning Of Discs

    1.3 Maintenance and Cleaning of Discs Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc. If there is anything on the disc surface, wipe it up with a soft cloth before using.

  • Page 5: The Remote Control Description

    1.5 The Remote Control Description OPEN BAND 1. TILT BUTTON MODE MENU 2. MENU BUTTON 3. POWER BUTTON 4. ^ BUTTON SETUP 5. >>| BUTTON 6. > BUTTON 7. |<< BUTTON 8. v BUTTON 0/10 9. SEL BUTTON SLOW_FWD 10. PLAY/PAUSE BUTTON SEARCH 11.NUMBER(0~10,+10 ZOOM...

  • Page 6: The Locations And Names Of Controls On Or In The Unit

    1.6 The Locations and Names of Controls on or in the unit OPEN BAND MODE AV IN MU TE The Front Panel SD/MMC The Front Facet after removing the front panel 1. OPEN button 13. INT/2 button 2. POWER/MUTE button 14.

  • Page 7: Wires Connection Description

    1.7 Wires Connection Description The Description of the Wires Connection Wiring Connecting Socket 1 Fixing Screw Bolt Wiring Connecting Socket 2 Radio A ntenna jack Black Black 1. Parking wire must be connected. And the parking brake must be engaged in order for the monitor to work.

  • Page 8: Unit Installation

    Description of Connecting the Parking Brake Line to the Parking Brake System Built in the Car Parking brake Ground(-)/Park Break(Coffee) Parking brake switch To metallic body or chassis of the car (inside the car) NOTE: after connecting the Parking Line, the video on the small monitor of the front panel will be display only after braking the car. 1.8 UNIT INSTALLATION INSTALLATION INSTRUCTIO NS THE UNIT IS INSTALLED TO BE AN ANTI-THEFT ONE.

  • Page 9: Common Operation

    2. Common Operation 1. To turn on/off the unit In power off mode, short press the POWER button to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit.

  • Page 10: Radio Operation

    10.To do general setup To do general setup, first pop up Mode Menu as in item 3, then tap the icon in the Mode Menu to pop up GENERAL SETUP interface as right. In the interface, select one of CLOCK SET, RDS MODE , OSD LANG, RADIO FREQ and SENSE SET on the left side by tapping them, then set them by tapping some icons on the right side accordingly.

  • Page 11: Load/Unload Disc, Usb Or Card

    4. APS BUTTON In RADIO mode: 1) When long pressing the APS button, the radio searches from the lowest frequency and checks the signal strength level until 1 cycle search is finished. And then the 6 strongest stations are preset to the corresponding preset number memory bank. The AS operation is implemented in the each bank of the selected band.
  • Page 12 MMC card into the USB jack or SD/MMC card slot (remove the front panel to insert SD/MMC card). To remove the USB in the USB jack, press the STOP button twice and then remove the USB. To remove the SD/MMC card from the SD/MMC card slot, press the STOP button twice and then push in the Root interface for MP3/W MA/MP4/JPEG card and then pull it out of the Card Slot.

  • Page 13: Pause Playback

    4.2 Pause Playback In the state of DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 4.3 Stop Playback In the state of DVD/VCD/MP3/WMA/CD playing, press the STOP button once to pause the playback, then press the PLAY button to resume the normal playback;...

  • Page 14: Playback With Speed

    In VCD mode 1. When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on the screen if the disc include the PBC menu. Press the number buttons to select your desired track to play. In MP3/WMA mode 1.

  • Page 15: A-B Repeat

    2. In the mode of VCD(PBC OFF)/CD playback: press the RPT button to select REP ONE, REP ALL or OFF. When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available. 3. In the mode of MP3/WMA playback: Press the RPT button to select REP ONE, REP DIR, REP ALL or OFF.

  • Page 16: Playback In Random

    4.13 Playback in Random In the state of DVD/VCD(PBC OFF)/MP3/WMA/CD playing, press the RDM button to switch between RANDOM (ON)/RANDOM OFF. When in RANDOM (ON) mode, it will play in random. 4.14 Playback in Zoom Mode In video/image mode, during playback, press the ZOOM button continuously to enlarge a certain area of the images on the screen with these multiples: ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF.

  • Page 17: Program Playback

    3. In the state of MP3/WMA playing, press the OSD button repeatedly on the remote control to turn on/off the playback status. When it is on, it will display the information such as: the serial number of the playing track, the elapsed time of the playing track, the remained time of the playing track.

  • Page 18: Playback Mp4 Files

    3. During JPEG playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows: >: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu.
  • Page 19 Press the < button to return to the previous level. Press the SETUP button again or use the direction buttons to highlight EXIT SETUP and then press the OK button to exit the Setup Menu. For the DVD System Menu, there are 6 setup pages in all. They display as follows: 4.23.1 SYSTEM SETUP TV SYSTEM This product supports output of various TV system.
  • Page 20 4.23.2 LANGUAGE SETUP OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback. AUDIO LANG This item is for selecting a audio language. SUBTITLE LANG This item is for selecting a subtitle language. MENU LANG This item is for selecting a disc menu language.
  • Page 21 It is for adjusting the hue of the video output. SATURATION It is for adjusting the saturation of the video output. SHARPNESS It is for adjusting the sharpness of the video output. 4.23.5 SPEAKER SETUP DOWNMIX It is for selecting your desired sound effect when there is not central speaker and sub-woofer.

  • Page 22: Region Code

    Region Code Q: Why does the unit display REGION ERROR after inserting disc into disc compartment ? A: Because the DVD player and disc has respective region code. If the region codes of them do not match with each other, the DVD player can not play the disc.
  • Page 23 player. Check whether the video connector is damaged. Ensure that you have set the right VIDEO settings of the player. BLACK AND WHITE PICTURE OR SCREEN ROLLING Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting. FLAWS OF PICTURE OR SOUND Check whether the setting of AUDIO is right.

  • Page 24: Specification

    6. Specification General Specification Power Supply Requirement..........DC 12V Maximum Power Output....4 x 80W(measured at DC 14.4 V) Dimensions(w x h x d)........178 x 50 x 160mm DVD Deck Specification Format........DVD/VCD/JPEG/MP4/MP3/WMA/CD Video System....NTSC/PAL/PAL-M/PAL-N/AUTO(optional) Audio System..............24 bit/96KHz Loading System............Auto Loading Mounting Angle..............0 to +/-30 Video Specification Video Type..............16:9 and 4:3 Video Output level........Composite:1.0±...

Table of Contents