Belkin N300 User Manual page 23

ReseTTInG The DUal-banD WI-fI RanGe exTenDeR
Updating the Range extender's firmware via the Web Interface
The following steps show you how to update your Dual-Band
Wi-Fi Range Extender's firmware using its web interface.
Click the button to "Check for Firmware Updates." This will
show you whether there is new firmware available.
Download the firmware file and save it to your PC.
Click "Choose Update File"; a box will open up. Select
the firmware file you just downloaded.
Click "Update Firmware."
Dual-Band Wireless Range Extender
Firmware update
Status
2.4Ghz Wireless Connection
From time to time, Belkin may release new versions of the Dual-Band Wireless Range
5Ghz Wireless Connection
Extender's firmware. Firmware updates contain improvements and fixes to problems that
Extended Networks Settings
may have existed. Click the check for update button below to see if there is a firmware
SSID Settings
update available for your extender.
Security
Wi-Fi Protected Setup (WPS)
Current Firmware>
Utilities
Restart Extender
Restore Factory Defaults
Firmware Update
Administrator Password
Log
Update Firmware
21
1.00.00 (0ct.11.2011)
Check for Firmware Updates
If you are setting up the Extender, you will need to rejoin your
home network, and check for updates by visiting Belkin's
support site.
Choose Update File
No File Chosen
Update Firmware