Gigabyte GA-F2A75M-DS2 User Manual page 19

12me-f275ms2-1002r
Table of Contents

Advertisement

& Core Performance Boost
Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU
performance-boost technology. (Default: Auto)
& Turbo CPB
(Note 1)
Allows you to determine whether to improve CPU performance. (Default: Disabled)
& CPB Ratio
(Note 1)
Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed.
(Default: Auto)
& Cool&Quiet
Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
Enabled
heat output from your computer and its power consumption. (Default)
Disables this function.
Disabled
& SVM Mode
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Enabled)
& C6 Mode
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Enabled)
& CPU core Control
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
to enable all CPU cores (number of cores available depends on the CPU being used). (Default: Automatic
mode)
& APM
Enables or disables Application Power Management. (Default: Enabled)
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disables this function. (Default)
Disabled
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& AMD Memory Profile (A.M.P.)
Allows the BIOS to read the SPD data on AMP memory module(s) to enhance memory performance when
enabled. (Default: Disabled)
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK/PCIe Clock Control and System Memory
Multiplier settings.
` Advanced Memory Settings
& E xtreme Memory Profile (X.M.P.)
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a CPU and a memory module that support this feature.
(Note 1)
(Note 2)
(Note 2)
, System Memory Multiplier, Memory Frequency(MHz)
(Note 2)
- 19 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ga-f2a85xm-ds2

Table of Contents