Color Bar - Sony NXCAM NEX-FS700U Operating Manual

AF MICRO ADJUSTMENT
When you use the LA-EA2 mount adaptor
(sold separately) and an A-mount lens, you
can register a specific focal setting for that
lens.
x ON/OFF
B OFF
Deactivates AF micro adjustment.
ON
Activates AF micro adjustment.
AMOUNT
x
You can set the adjustment value of the
attached lens.
Set a higher value to focus farther from the
camcorder, or set a lower value to focus
closer to the camcorder.
-20 - B 0 - +20
CLEAR ALL
x
You can clear the values of all the
registered lenses.
b Notes
• When [AF MICRO ADJUSTMENT] is not set
to [ON], you cannot register an adjustment
value.
• We recommend that you decide the value under
actual shooting conditions.
• When you attach a lens that is registered on the
camcorder, the registered value is displayed. If
the lens is unregistered, [±0] is displayed.
• If the number of registered lenses reaches 30,
the [AMOUNT] is grayed out and cannot be
selected. To register any further lenses, you first
need to delete already registered lenses. To do
this, attach a lens to delete its registered value,
then reset its value to "±0." Alternatively, you
can reset the values of all lenses with [CLEAR
ALL].
• If you perform AF micro adjustment with the
lens of another manufacturer, the adjustment
values of Sony, Minolta, and Konica Minolta
lenses may be affected. Do not use this function
with lenses of any other manufacturer.
• You cannot perform individual AF micro
adjustment for Sony, Minolta, or Konica
Minolta lenses of the same specifications.

COLOR BAR

x ON/OFF
B OFF
Does not display color bars.
ON
Displays color bars on the LCD screen,
records them on recording media, and
outputs audio tone signals.
This function helps you to adjust colors
when you view movies recorded with your
camcorder on a TV or a monitor.
b Notes
• This function is automatically set to [OFF]
when you switch the format, perform the
function by the MENU button, or turn off the
camcorder.
• You cannot change the setting during recording
or expanded focus operation.
TONE
x
B OFF
Does not output audio tone signals.
ON
Outputs audio tone signals (1 kHz: full bit
-20dB ([60i]), -18dB ([50i])). Set [ON/
OFF] to [ON], too.
z Tips
• You can assign [ON/OFF] to an ASSIGN button
(p. 64).
• If you record color bars with [TONE] set to
[OFF], the camcorder records sound from the
microphone.
91