MULTIQUIP SideWinder HS81 Operations & Parts Manual page 18

Blade Installation Procedure
STEP 1
For proper installation, first remove the blade shaft nut
outer flange , and inner "dual-arbor" flange
Figure 12. Inner and Outer Flanges (Removal)
STEP 2
A dual sided, "dual-arbor" inner flange
a 20 mm or 1-inch arbor hole for operator safety and convenience.
The outer flange
fits on top of the cutting blade.
Figure 13. Inner and Outer Flanges (Placement)
PAGE 18 — HS81 CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #4 (09/12/05)
HS81 CUT-OFF SAW — ASSEMBLY INSTRUCTIONS
,
.
accommodates either
STEP 3
Chose the proper blade arbor side of the inner flange (to match
your cutting blade arbor) and place this selected side to the
blade shaft .
Figure 14. Selecting the Proper Blade Arbor
STEP 4
Match the arbor side to the dimension of your blade arbor and
"sandwich" between the inner and outer flanges. Tighten the
blade shaft nut securely to hold the blade in place.
Figure 15. Securing the Cutting Blade