Control Settings - GE GSD1920 Owner's Manual

Models GSD3130, GSD3210, GSD3220 and GSD3230
CYCLES
HI TEMP WASH
POT- NORMAL
ON
SCRUBBER WASH
1

Control Settings–

Cycles
1
POTSCRUBBER/ For heavily soiled dishes or cookware with dried-on or baked-on soils. Everyday
HEAVY WASH dishes may be included.This cycle will not remove burned-on foods.
NORMAL WASH For loads of everyday dishes, glasses and cookware with medium soils.
SHORT WASH For quickly washing loads of everyday dishes with medium soils that have not
RINSE & HOLD For rinsing partial loads that will be washed later. Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This cycle will take approximately
2 Energy Options
HI TEMP Provides extra heat for the best performance. It is used best with
WASH heavily-soiled dishes.
HEATED DRY Turns the drying heater on for fast drying. This cycle will extend the time
HEATED DRY Shuts off the drying heat options. Dishes air dry naturally and energy is saved.
3 Start
On some models— Latch the door and slowly turn the Dial to the START position.
Don't turn it past the START position, or you could accidentally miss a rinse.
On some models— Slowly turn Dial to the desired cycle and latch door to start.
Don't turn it past the desired wash cycle, or you could accidentally miss a rinse.
There is a time delay between start-up and water fill so you will not hear
any wash action right away.
ENERGY OPTIONS
HEATED DRY
OFF
ON OFF
2
Make sure the Dial is at the OFF position
NOTE: Many dishes have lighter soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
dried on, such as loads consisting mostly of glasses.
31 minutes.
ON to your wash cycle.
OFF
OFF
START
SHORT WASH
PLATE WARMER
PLATE WARMER
(HEATED DRY ON)
(HEATED DRY ON)
RINSE & HOLD
(HEATED DRY OFF)
1 3
OFF
START
SHORT WASH
RINSE & HOLD
(HEATED DRY OFF)
9