Canon VB-C50Fi User Manual page 25

Rear
On the rear of the VB-C50Fi there are the MAC address required for network settings, a Reset
switch that returns the factory default settings and the serial number.
MAC address
The MAC address is required
when setting the IP address
and making other network
settings. Please make a
note of it before installing
this unit (→ P.2-8).
Model Number
VB-C50Fi
NTSC VB-C50FiN
PAL VB-C50FiP
Serial No.
The serial number
for this unit is shown
here.
Reset switch
You can revert all settings of the unit to
the factory default settings by pressing
this button with a thin-tipped object while
turning on the power switch, and keeping
the button pressed for more than five
seconds after turning on (→ P.7-21).
Bottom
System Components and Their Operation
Screw hole for arm mounting
Multi-connector
You can connect the
Multi-Terminal Module
(VB-EX50) to the VB-
C50Fi via the connector
(→ P.1-10).
100/10 BT Ethernet connector
(100Base-TX, 10Base-T Auto-Negotiation)
Power connection
socket
Screw hole for tripod
mounting
1-9