Lincoln Navigator Owner's Manual page 157

Power Recline
Note: On vehicles with memory seats, to prevent damage to the seat,
the power seats are designed to set a stopping position just short of the
end of the seat track. If the seat encounters an object while moving
forward or backward, a new stopping position will be set. To reset the
seat to its normal stopping position:
• After encountering the new stopping position, press the power seat
control again to override.
• Continue pressing the control until it reaches the end of the seat
track.
• Continue pressing the control for approximately two seconds. You will
feel the seat bounce back slightly.
Power Lumbar
2013 Navigator (nav)
Owners Guide gf, 1st Printing
USA (fus)
Seats
Move the switch to recline the seat
back forward or rearward.
The control is located on the
outboard side of the seat. Press the
forward or rearward side of the
control for more or less support.
157