Turn On; Switch To Standby Mode - Philips SBT300 User Manual

AC power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back of the speaker.
Connect the AC power adaptor to:
• the power supply socket on the back of
the speaker.
• the wall power outlet.
DC IN
5V . 1A
EN
6

Turn on

Switch ON/OFF on the speaker to the
•
ON positon.
» The Bluetooth indicator flashes (blue).

Switch to standby mode

The speaker switches to standby mode in the
following situations.
• In Bluetooth mode: deactivate bluetooth
connection without audio in cable plugged
in.
In MP3 link mode: no audio signal
•
detected over 15 minutes.
• The battery level is low.