Flashing Display Lights - GE Profile GSD4610 Owner's Manual

Flashing display lights.

Status Lights
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND
STATUS
SENSING
WASHING
RINSING
DRYING
CLEAN
PLUS A
BEEPING
SOUND
10
What It Means
CLEANSENSOR Error
START/RESET pad has
been pressed
Control Error
Control Error
What To Do
If the sensing light doesn't come on
during the NORMAL or POTS PANS
cycles, the CLEANSENSOR is not
working. Call for service. The
dishwasher will continue to work
without the CLEANSENSOR.
NOTE: This light will not stay on the
entire cycle.
Allow dishwasher to drain and reset
before selecting a new cycle.
Press the START/RESET pad to turn
off the beeper. But the RINSING
light will continue to flash. If this
continues call for service.
Press the START/RESET pad to turn
off the beeper and the dishwasher
will attempt to reset. Then restart the
wash cycle. If this error continues
call for service.