Table of Contents
Advertisement
Playback menu (continued)
Changing the date and time
— clock
Reset the clock if you need to adjust the
date and time. Display the "clock" screen
under the playback menu and follow steps
2-5 of "3: Setting the date and time" (page
18).
42
Changing the date format
— Y/M/D
You can change the order of Y/M/D
(year/month/day) for the date display in
camera mode (page 29) and for DPOF
printing (page 41). Changing the date format
does not change the date format of images
that have already been marked for Print With
Date. To change the date format of marked
images, you need to mark the images again
using the new date format (page 41).
Y/M/D, 12-hour format
(default setting)
� � � � �
� � � � �
����
� � � �
M/D/Y, 12-hour format
� � � � �
� � � � �
����
� � � �
D/M/Y, 24-hour format
� � � � �
� � � � �
� � � �
����
Turning off the "beep sound"
— beep
On (default setting)
The "beep" sounds when you
use the buttons or the touch
����
� � � �
pad and also when you press
the shutter button.
Shutter Only
The "beep" sounds only when
you press the shutter button
� � � �
����
down completely to take a
picture.
This "beep" sound cannot be
turned off.
Formatting the "Memory Stick
Duo" — format
Format the "Memory Stick Duo" if the camera
does not recognize it or if pictures cannot be
taken even after all images have been
deleted. Formatting erases all images on the
"Memory Stick Duo."
You cannot recover images that have been
erased. You should always check the images
before formatting and make backup copies
of important images to your computer or
other storage equipment.
1
Insert the "Memory Stick Duo" that you
want to format in the camera.
2
In playback mode, touch both ends of the
touch pad for about 2 seconds to display
the playback menu and then display the
format screen.
������
� � � � � �
3
Touch the center of the touch pad to
display the confirmation screen.
� � � � � �
������
��
� �
� � � � � �
������
Continued on the next page
43
Advertisement
Table of Contents
