Sound - Philips 32PFL5708/F7 User Manual

Access advanced settings.
Color
Select a predefined color temperature, or
alignment adjust Red / Green / Blue gain and offset.
Noise
Select the amount of noise reduction for the
reduction picture. (Off, Low, Middle, and High)
Tint
to add green
Sharpness
to soften
Dynamic
Dynamically enhance the details in the dark,
Advanced
contrast
medium, and light areas of the picture.
Settings
Dynamic
Dynamically adjusts backlight level based on
backlight
average brightness of the picture frame.
Select the picture ratio to suit the video
Aspect ratio
source.
(Normal, Zoom, Wide, Cinema, and Auto)
Select to turn On or Off the overscan
Overscan
function.
to reduce power
Backlight
consumption
Reset
Select to restore the default picture settings, while channel
Picture
installation settings remain the same.
Settings
Picture Picture
Color alignment

Sound

Sound
Noise reduction
Tint
Setup Setup
Sharpness
Features Features
Dynamic contrast
USB USB
Dynamic backlight
Aspect ratio
Overscan
Backlight
to set the color temperature to Cool,
Color
Normal, Warm and Personal.
temperature
When you adjust the following settings,
mode
Personal will be set automatically.
to decrease contrast
Red gain
with red
Color
to decrease contrast
Green gain
alignment
with green
to decrease contrast
Blue gain
with blue
to decrease brightness
Red offset
with red
to decrease brightness
Green offset
with green
to decrease brightness
Blue offset
with blue
Cursor ◄ Cursor ►
to add red
to sharpen
Cursor ◄ Cursor ►
to set the backlight
brighter
Middle
On
Off
Normal
On
Cursor ◄ Cursor ►
to increase contrast
with red
to increase contrast
with green
to increase contrast
with blue
to increase brightness
with red
to increase brightness
with green
to increase brightness
with blue
Sound
Before you begin:
You must set Home in Location.
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into Standby mode.
1
Press (MENU) to display Home Menu and use ▲▼to select
Sound, then press OK.
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
• The following sound settings can be configured. Depending on
the sound source, some sound settings are not available.
Picture Picture Picture
Auto sound
Sound Sound
Equalizer
Setup Setup DTS TruSurround
Auto volume leveling
Features Features
Balance
USB USB
TV speakers
Advanced sound
Reset sound settings
to select the desired setting, then press OK
Auto sound
(Standard, Movie, Music, Sports, News, and Personal)
to select the specific frequency and use ◄► to adjust the level,
Equalizer
then press OK
DTS
0
Enable DTS TruSurround to enhance your audio experience.
TruSurround
55
Auto
Dynamically adjusts volume across different channels and sources
volume
to maintain a consistent level.
leveling
Adjust the balance of the right and left speakers to best suit your
Balance
listening position.
Select On to output sound from TV speakers, Off to manually
turn off TV speakers and enable Digital Audio Output.
55
Speakers EasyLink uses HDMI-CEC to automatically turn off TV
TV speakers
speakers and direct sound to connected HDMI-CEC compliant
Home Theater System using HDMI-ARC or Digital Audio Port if
it detects one.
Digital
output
format
Advanced
Audio
sound setting
Audio
Language
Reset sound
Select to restore the default sound settings, while channel
settings installation settings remain the same.
p. 26
Standard
On
Off
Speakers EasyLink
Select the type of digital audio output: Bitstream,
PCM.
Select the audio mode from: Mono, Stereo, and
SAP. For use of Analog TV only.
You can select your preferred audio language
when TV channel broadcasts multiple/dual audio
languages.
19
English
0