Setting Up Wlan Access; Access Via Umts; Ethernet And Lan - Fujitsu T4410 Operating Manual

Working with the notebook

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.

Access via UMTS

If you ordered an integrated UMTS module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. The
optional UMTS module is ready for use straight away.
If you did not order a UMTS module, you can purchase the accessories for UMTS reception
from your retailer or your Fujitsu Technology Solutions dealer.
You will find information on establishing the connection with the UMTS network
in the documentation for the hardware used.
You can connect your device with the Internet via UMTS. To do this, use one
of the following types of connection:
• a USB dongle (a USB stick with your mobile phone provider's SIM card)
• UMTS ExpressCard (for inserting in the ExpressCard slot of your device)
• mobile end-device (e.g. mobile phone with Bluetooth or cable connection)

Ethernet and LAN

EthernetLAN
The internal network module of your notebook supports Ethernet LAN. You can use it to
establish a connection to a local network (LAN = Local Area Network).
1
Your network administrator can help you to configure and use the LAN connections.
The network cable is not included in the delivery scope. This type of
cable can be obtained from a specialist dealer.
70
► Connect the network cable to the LAN
port of the notebook (1).
► Connect the network cable to your
network connection (2).
2
Fujitsu Technology Solutions