Ford Mustang Owner's Manual page 47

Using the Automatic Memory Load feature
If no stations are in memory preset, you can
activate the Auto Memory Load feature by
pressing and holding the "AUTO PRESET"
button for approximately three seconds.
Auto Memory Load sets all memory buttons
in AM, FM1 and FM2 sequentially by seeking
out the first six strong stations for the
respective band and storing them in memory
buttons 1-5. (FM2 will store the second set of
strong stations from the FM band.)
With Auto Memory Store, you can continually
set strong stations into your memory buttons
without losing your existing memory presets,
which is especially handy while traveling. Your
radio will automatically set your memory
buttons to the strong local stations so you don't
have to continually manually tune to existing
stations.
Activate Auto Memory Store by pushing the
"AUTO PRESET" button once. Your radio will
set the first five strong stations of the band you
are in (AM, FM1 or FM2) into the memory
buttons. The display will show "AUTO," then
run through the frequencies, stopping
momentarily on the stations being set into the
memory buttons. The radio is now in the
"AUTO" mode and the display will show
"AUTO" each time a preset is activated.
NOTE: If there are fewer than five strong
stations in the frequency band, the
remaining unfilled buttons will store
the last strong station detected on the
band.
After all stations have been filled, the radio will
begin playing the station stored on memory
button 1.
45