Advertisement
QuickSpecs
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model or configure-to-order (CTO) server. To
ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE: Configure-to-order server blades must start with a CTO Blade Server
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All CTO (Configure to Order) systems will be populated with sufficient hard drive blanks based on the number of initial hard
drives ordered with the server.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
Step 2: Choose Required Options (one of the following from each list unless otherwise
noted)
HP Processors
HP ProLiant BL660c Gen8 10Gb FlexibleLOM Configure-to-order Blade Server
Each configurable model ships with:
Two (2) FlexibleLOM connectors providing a choice of supported FlexibleLOMs (see Step
2)
One (1) embedded HP Smart Array P220i Controller with RAID 0, 1
Optional HP Smart Array P220i Controller 512MB FBWC (listed in step 4)
Two (2) HP small form factor hot-plug SAS/SATA/SSD hard drive bays
Three (3) PCIe Gen 3.0 I/O expansion slots (one x8 Type A, two x16 Type B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management Engine (standard)
NOTE: The BL660c Gen8 supports two or four processors; one and three processor
configurations are not supported.
NOTE: All processor kits contain two (2) processors.
NOTE: If four processors are desired, select one 2P xxxxxx-L21 processor kit here in
Step 2 and one xxxxxx-B21 2P processor kit in Step 3.
NOTE: All processors within the server must be identical.
NOTE: The processor model as well as the memory configuration determines the
maximum speed memory can operate. Please see the see the "Memory" section later in
this document.
Eight-Core Processors
HP BL660c Gen8 Intel® Xeon® E5-4650 (2.7GHz/8-core/20MB/130W) FIO 2-processor
Kit
HP BL660c Gen8 Intel® Xeon® E5-4650L (2.6GHz/8-core/20MB/115W) FIO 2-processor
Kit
HP BL660c Gen8 Intel® Xeon® E5-4640 (2.4GHz/8-core/20MB/95W) FIO 2-processor Kit
HP BL660c Gen8 Intel® Xeon® E5-4620 (2.2GHz/8-core/16MB/95W) FIO 2-processor Kit
Six-Core Processors
HP BL660c Gen8 Intel® Xeon® E5-4617 (2.9GHz/6-core/15MB/130W) FIO 2-processor
Kit
HP BL660c Gen8 Intel® Xeon® E5-4610 (2.4GHz/6-core/15MB/95W) FIO 2-processor Kit
HP BL660c Gen8 Intel® Xeon® E5-4607 (2.2GHz/6-core/12MB/95W) FIO 2-processor Kit
DA - 14394 North America — Version 17 — December 16, 2013
HP ProLiant BL660c Generation 8 (Gen8) Server Blade
679118-B21
679098-L21
679110-L21
679100-L21
679102-L21
679112-L21
679104-L21
679106-L21
Page 19
Advertisement
