Switching Betweens; And Handset; Intercom Operation; Making An Intercomc - GE 27958B User Manual

S B
WITCHING ETWEEN
You can switch between speakerphone and handset after dialing a number,
or any time during a conversation.
Speaker to Handset — Press TALK/callback on handset, and then press
SPEAKER/CALLBACK on the base or lift the corded handset. Speak into
the handset.
Corded/Cordless Handset to Speaker — Press SPEAKER/CALLBACK, then
hang up the handset. Speak into the Speakerphone.
I O
NTERCOM PERATION
A two-way intercom is possible between the base and cordless handset
without tying up the telephone line and since the telephone line is not
used, you can still receive incoming calls.
M I
AKING AN NTERCOM
1. Make sure the phone is OFF (not in TALK mode).
2. Press the PAGE/INTERCOM button (base) or the intercom button (cordless
handset). A paging tone sounds at the base and cordless handset.
3. When finished, press the PAGE/INTERCOM button or the intercom button.
NOTE: To cancel the intercom call, press PAGE INTERCOM (base) or
intercom (cordless handset).
A
NSWERING AN
1. Press the PAGE/INTERCOM button (base) or the intercom button
(handset).
2. When finished, press the PAGE/INTERCOM or the intercom button again.
R I
ECEIVING AN
During an intercom call, if you receive a telephone call, both intercom
users are alerted as follows:
Cordless Handset - Receives a ringing tone. To take the call, press TALK/
callback. (The intercom connection is discontinued.)
22
S
PEAKERPHONE AND
C

ALL

I C
NTERCOM ALL
T
NCOMING ELEPHONE
H
ANDSET
C D
ALL URING AN
I C
NTERCOM ALL