Basic Operation - JVC AV-21LS2 Instructions Manual

Basic operation

• The illustration below is for the remote control
RM-C1010. Depending on the applicable mod-
els, the remote controls may not look exactly
the same.
MUTING
SYSTEM
COLOUR SOUND
DISPLAY
MENU
Ι/ΙΙ
TV/VIDEO
1
OFF
TIMER
4
PICTURE
MODE
7
CHANNEL
RETURN+
SCAN
CHANNEL
TEXT
REVEAL HOLD
SUBPAGE
STORE
RM-C1010
POWER
CINEMA
SURROUND
ECO
SENSOR
TV/TEXT
2 3
5 6
8 9
- / --
0
VOLUME
INDEX SIZE
CANCEL
MODE
TV
1 Press the POWER button to turn
your TV on.
• If your TV does not turn on, press the Main
power button on the TV then press the
POWER button again.
• You can also turn on your TV by pressing
any of the following buttons;
- the CHANNEL m button
- the Number buttons
- the TV/VIDEO button
2 Select a channel.
I Press the CHANNEL m button.
• Up/down selection cannot be selected for
channels to which the SKIP has been set
to "YES". See page 19.
I Press the Number buttons to enter
the channel number.
• If you want to enter a two-digit number,
press the -/-- button to select the two digit
mode "--", then enter the channel num-
ber.
3 Press the VOLUME M button to
adjust the sound.
4 To turn your TV off, press the
POWER button.
• We recommend that you press the Main
power button on the TV to turn the main
power off if you do not plan to use your TV
for a long time or if you wish to save energy.
If the picture is not clear:
Press the COLOUR SYSTEM button to
select another colour system, see page 8.
If the sound is not clear:
Press the SOUND SYSTEM button to select
another sound system, see page 8.
Viewing Images from an External
Device:
Press the TV/VIDEO button to select the
VIDEO mode.
• You can also use the INPUT function to select
the VIDEO mode. For details, refer to page 14.
7