Shield Can Lid Bt Gps - Sony XPeria ST25i Working Instructions

Replacement

4.17 Shield Can Lid BT GPS

Follow the 3.1 – 3.5 Disassembly instructions!
Carry out the Removal as described below.
Prepare the Shield Can Lid BT GPS.
Carry out the Installation as described below.
Follow the 5.1 – 5.5 Reassembly instructions!
REMOVAL
Unsnap the corners of the Shield Can Lid BT GPS by using
a pair of tweezers and pull upwards to remove it.
Scrap! Not to be reused!
INSTALLATION
Place a new Shield Can Lid BT GPS in the correct position.
Press to snap it.
Only the edge of the Shield Can is allowed to press.
1263-4086 Rev 6
© Sony Mobile Communications AB – Company Internal
Working Instruction Repair Instruction Mechanical
39(53)