Using Web Browser
Network con g page
You can make detail network settings on Display, when connecting without the administrator authority or when
connecting through an access point (infrastructure mode).
LAN settings
1
Click [Detailed set up] in the menu.
2
Select the items to change and click [Next].
The settings window appears, showing the current
settings.
•
To change the LAN settings, click [Change].
•
To return to the previous window, click [Back].
3
Complete the detailed settings and click
[Next].
When [Next] is clicked, the next page appears, enabling
you to complete the detailed settings as desired.
Settings performed here are the same as the settings
performed with the [Network Setup] menu of the Display,
except when "EAP-TLS" is selected as the EAP.
•
Wired LAN (See page 10)
•
Wireless LAN (See page 11)
•
Register user name, password, digital certificate, and
CA certificate when the authentication method is
"EAP-TLS".
USER NAME
PASSWORD
DIGITAL CERTIFICATE : Register a digital certi cate (extension: PFX) to be used for authentication.
CA CERTIFICATE
•
Authentication error occurs if the time of the Display is not set correctly. Check Adjust clock page [Adjust
clock]. (See page 25)
After all required items have been entered, a con rmation window appears.
24
: Input a user name used for authentication (excluding spaces) (maximum 64
characters).
: Input a password used for authentication (maximum 64 characters).
: Register a CA certi cate (extension: CER) to be used for authentication.
(Wireless LAN screen)