Advertisement
S
F
P
E
C
I
L
DLP
™
Projector
Notes on projector placement and operation
The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the
following precautions.
1.
Never place objects on top of the projector while it is operating.
2.
Make sure there is the unobstructed space as shown below or more around the projector's exhaust
openings. In addition to this space, also ensure that there is a sufficient work space for removing
and installing the lamp, filter and other parts.
3.
Make sure that nothing blocks the projector's air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward the
projector's air intake or exhaust openings.
4.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector's protective circuit to interrupt projector operation.
500 mm
(1 ft 8 in)
or more
Direction of air intake and exhaust
Operating the projector continuously
1.
If the projector is to be operated continuously 22 hours or more, lamp replacement cycle duration
becomes shorter.
2.
The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short
periods (one hour or less).
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
All other trademarks are the property of their respective trademark owners.
As of June 2013
SFD13M008
E
500 mm
(1 ft 8 in)
or more
1,000 mm ( 3 ft 3 in) or more
PT-LX300
500 mm
(1 ft 8 in)
or more
Intake
Exhaust
1 0 / 1 0
Advertisement
