Page 1
Always there to help you HTD5510 Register your product and get support at HTD5540 www.philips.com/welcome HTD5570 Question? Question? Contact Contact Philips Philips User manual...
Contents 7 Product specifications 1 Important Safety Care for your product 8 Troubleshooting Care of the environment 9 Notice 2 Your home theater Copyright Main unit Trademarks Remote control Connectors 10 Language code 3 Connect and set up Connect speakers Connect to TV Connect audio from TV and other devices Set up speakers...
1 Important wall mount to a wall that can support the combined weight of the product and the wall mount. Koninklijke Philips Electronics N.V. bears no responsibility for improper Read and understand all instructions before you wall mounting that results in accident, use your home theater.
of children at all times! If swallowed, the Never dispose of your product with other battery can cause serious injury or death. household waste. Please inform yourself about Severe internal burns can occur within two the local rules on the separate collection of hours of ingestion.
2 Your home Load Browse theater Pause Mute Congratulations on your purchase, and welcome to Philips! To fully benefit from the Remote control support that Philips offers, register your home theater at www.philips.com/welcome. This section includes an overview of the remote control.
(Standby-On) k SURR • Switch the home theater on or to Select surround sound or stereo sound. standby. (Play/Pause) • When EasyLink is enabled, press Start, pause or resume play. and hold for at least three seconds to switch all connected HDMI CEC (Stop) compliant devices to standby.
c AUDIO IN Audio input from an MP3 player (3.5mm jack). Back connectors a AC MAINS Connect the supplied AC power cable. b SPEAKERS Connect to the supplied speakers and subwoofer. c VIDEO OUT Connect to the composite video input on the TV.
3 Connect and set FRONT FRONT FRONT WOOFER LEFT RIGHT CENTER This section helps you connect your home theater to a TV and other devices, and then set it up. For information about the basic connections of your home theater and accessories, see the quick start guide.
SUBWOOFER (subwoofer): such as volume control for both the Place the subwoofer at least one meter TV and the home theater. (see 'Set to the left or right of the TV. Leave about up EasyLink (HDMI-CEC control)' on 10-centimeter clearance from the wall. page 10) If you cannot hear the TV audio through your home theater, set up the audio...
If you cannot hear the TV audio through Connect audio from TV and your home theater, set up the audio other devices manually. (see 'Set up the audio' on page Play audio from TV or other devices through your home theater speakers. Note Use the best quality connection available on •...
Option 2: Connect audio through Set up EasyLink (HDMI-CEC analog audio cables control) Basic quality audio This home theater supports Philips EasyLink, which uses the HDMI-CEC (Consumer AUDIO IN- AUX Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI can be controlled by a single remote control.
Page 13
Select [Video], and then press OK. EasyLink controls Select [HDMI Setup] > [EasyLink Setup] With EasyLink, you can control your home > [Sys Audio Control] > [On]. theater, TV, and other connected HDMI-CEC • To play the audio from the TV compliant devices with a single remote control.
4 Use your home Play buttons theater Button Action Navigation Navigate menus. buttons This section helps you use the home theater to Confirm an entry. play media from a wide range of sources. (Play/ Start, pause or resume play. Before you start Pause) •...
Note Note • • Picture and sound can be synchronized through the Make sure that the subtitle file has the exact same setup menu, press (Home), select [Setup] > [Audio] name as the video file. For example, if the video file is >...
Press the Navigation buttons buttons and USB storage devices OK to select and change: • [Info]: Display the play information. Enjoy pictures, audio, and video stored on a [PBC]: Enable or disable the content • USB storage device such as an MP4 player. menu navigation of VCD and SVCD What you need discs with Play Back Control feature.
Musical slideshow Play buttons Button Action If the picture and audio files are from the same disc or USB storage device, you can create a Select a preset radio station. musical slideshow. Alphanumeric Select an audio track and then press OK. buttons Press BACK and then go to the picture...
[Karaoke Idol]: Have a Karaoke Using the 3.5mm stereo audio cable, • connect the MP3 player to the AUDIO IN contest with your friends. Follow the connector on your home theater. on-screen instructions to start the • If you use 6.5mm stereo audio cable, contest.
Page 19
[Stereo]: Two-channel stereo sound. • Ideal for listening to music. Note • If the audio source is a 2.1 channel. multi-channel mode will output 5-channel stereo sound.
5 Change settings Note • If your preferred disc language is not available, select [Others] from the list, and enter the 4-digit language code found at the end of this user manual (see The home theater settings are already 'Language code' on page 27). configured for optimal performance.
Lock disc Audio settings Press (Home). Press (Home). Select [Setup] and then press OK. Select [Setup] and then press OK. Select [General] and then press OK. Select [Audio] and then press OK. [Disc Lock]: Lock the disc to restrict • [HDMI Audio]: Set the HDMI audio •...
Restore default settings Press (Home). Select [Setup] and then press OK. Select [Preferences] > [Default], and then press OK. Follow the onscreen message to restore default setting. » Your home theater is reset to its default settings, except for password, parental control and disc lock settings.
6 Update software Step 1: Download the latest software Connect a USB flash drive to your computer. Philips continually tries to improve its products. In your web browser, go to www.philips. To get the best features and support, update com/support. your home theater with the latest software.
7 Product • Video: .avi, .divx, .mpg, .mpeg, • Picture: .jpg, .jpeg specifications Amplifier • Total output power: 1000W RMS (30% THD) • Frequency response: 20 Hz-20 kHz / Note ±3 dB • Specifications and design are subject to change without •...
Page 25
Front/Rear speaker: • Output power: 4 x 166 W RMS (30% THD) • Speaker impedance: 4 ohm • Speaker drivers: 1 x 78 mm (3") full range • Dimensions (WxHxD): HTD5510: 90 x 185 x 82 mm (front/ • rear)
8 Troubleshooting Sound No sound from home theater speakers. • Connect the audio cable from your home theater to your TV or other devices. However, you do not need a separate Warning audio connection when the home theater • Risk of electric shock. Never remove the casing of the and TV are connected through an HDMI product.
Page 27
DivX subtitles do not display correctly. • Make sure that the subtitle file name is the same as the movie file name (see 'Subtitles' on page 13). • Select the correct character set (see 'Subtitles' on page 13). Cannot read the contents of a USB storage device.
9 Notice registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. This section contains the legal and trademark notices. The terms HDMI and HDMI High-Definition Copyright Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI...
10 Language code Inupiaq 7375 Pushto 8083 Abkhazian 6566 Afar 6565 Irish 7165 Russian 8285 Afrikaans 6570 Íslenska 7383 Quechua 8185 Amharic 6577 Italiano 7384 Raeto-Romance 8277 Arabic 6582 Ivrit 7269 Romanian 8279 Armenian 7289 Japanese 7465 Rundi 8278 Assamese 6583 Javanese 7486...
Page 30
11 Index language language code amplifier audio main unit predefined modes overview specifications specifications audio options troubleshooting media formats care connector product connectors front connectors control options disc play picture overview main unit main unit remote control discs audio options picture control buttons options...
Page 31
safety use of the product sound predefined sound mode surround sound synchronize picture and sound troubleshooting sound mode speakers specifications surround sound subwoofer specifications synchronize picture and sound time search titles trademarks troubleshooting connection main unit picture play sound tuning grid format USB storage device options...